Pointuch Prime Connect Alarm Clock Wireless Charger Instruction Manual

ALARM CLOCK
WIRELESS CHARGER

INSTRUCTION MANUAL

Product Diagram

Wireless Charger

IMPORTANT SAFETY PRECAUTIONS

When using your Alarm Clock Wireless Charger, basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR ALARM CLOCK WIRELESS CHARGER.
2. Do not use near water. Do not place on any wet surfaces.
3. Keep away from pets and children
4. Do not expose yourself to excessive heat, flames, or fire.
5. Always press all buttons or switches carefully.
6. Do not use in extremely dry environments.
7. Do not expose to temperatures above 45°C or below 0°C.
8. Do not attempt to repair this product yourself.
9. Do not drop, puncture or expose to excessive trauma.
10. Unplug during lightning storms.
11. Keep out of direct sunlight.
12. Keep distance between any implanted medical devices (cardiac pacemaker, implantable cochlea, etc.) and the alarm clock wireless charger >20cm to avoid potential interference with the medical device.

SPECIFICATIONS

• Input: 5V/2A (requires 5v/2A wall charger: not included)
• Wireless Charging Output: 10W (MAX)
• Charging Efficiency:70%
• Transmission distance: 58mm
• Product Size: 1409875mm
• Item: PCQI-1001-AS

CAUTION

• This is not a toy. Please keep away from small children.
• Please keep the unit away from water and heat.
• This unit is for indoor use only.
• Do not operate this unit with a damaged plug.

TECHNICAL SUPPORT

Please do not attempt to fix the product yourself. If you are experiencing any problems with the product please do not return it to the store you bought it from. You can contact our technical support representatives and they will assist you with any questions you may have. For assistance operating your product, please consult the User’s Manual or feel free to contact iWorld technical support:

iWorld Global Wholesale LLC
65 W. 36th Street, 11th floor
New York, NY 10018, USA| www.iworldnyc.com
email: support@iworldnyc.com
Please keep instructions for further reference.
---|---

@ 2021 PrimeConnect
65 WEST 36TH STREET NEW YORK, NEWYORK 10018

ALL OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS. DEVICE NOT INCLUDED. THE ACTUAL PRODUCT MAY DIFFER SLIGHTLY FROM THE IMAGE SHOWN.
MADE IN CHINA.

WIRELESS CHARGING:

1. Output power: 10W
2. When not charging, the indicator light will be solid red. To Charge a Qi-enabled wireless device, place it on the wireless charging pad. The indicator light will turn blue when successfully charging. When the device is fully charged, the indicator light will turn red. When placing any other metal, nonqi enabled object onto the charging pad the foreign object detector indicator light will flash red and blue until it is removed.

CLOCK:
TIME MODE SETTING:
Double-click the “M” button to switch between the 12-hour and 24-hour system; the 12-hour system has AM and PM displays.

ALARM CLOCK AND TIME SETTING:

1. Press and hold the “M” button for 3 seconds to set the time, when the time on the display screen starts flashing, press the +/-button to set the minute of the alarm clock. Press the “M” button to set the hour of the clock. If no further operation within 5 seconds, the settings will be saved. You could also press the “M” button to save the settings.
2. Press and hold the “Clock” button for 3 seconds to set the alarm. Press the +/- button to set the minute of the alarm, then short press the “Clock” button to switch to set the hour of the clock. If no further operation within 5 seconds, the settings will be saved.

TURN ON/OFF THE ALARM CLOCK:

1. When the alarm clock rings, pressing any button will turn it off.
2. Ring mode: The alarm clock rings continuously until a button is pressed to turn it off.

DISPLAY SCREEN BRIGHTNESS SETTING:

1. The light brightness of the display screen has 5 levels: Max/Strong/Medium/Weak/Off.
2. Adjust the brightness by short pressing the “+/-” button.

TIME MEMORY:

1. The device needs to be connected to a USB power source to power(not included).

The wireless charging pad is compatible with (vendor provides smartphone devices to be listed) Device names such as iPhone X; iPhone 8 Plus; iPhone 8; Samsung Galaxy S8/S8+; Samsung Galaxy S7/S7 Edge; Samsung Galaxy Note 8 and LG G6/V20/V30, etc.

FCC Caution:

5. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

6.
IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
7.
—Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 15cm between the radiator& your body.

@ 2021 PrimeConnect
65 WEST 36TH STREET NEW YORK, NEWYORK 10018

ALL OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS. DEVICE NOT INCLUDED. THE ACTUAL PRODUCT MAY DIFFER SLIGHTLY FROM THE IMAGE SHOWN.
MADE IN CHINA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>