Pointuch W-0281 15W Wireless Charger User Manual
- June 6, 2024
- Pointuch
Table of Contents
Pointuch W-0281 15W Wireless Charger
Model： W-0281
Function ： Wireless charging、USB-A Output
Product structure
How to use
Plug in
Connect the power adapter to any wall outlet and plug it into the device using the included USB cable.
| Way of use | Illustration | Input |
|---|
Wireless Charging only
| 
|
5V\2.1A;9V\2.5A;
12V\2A
Warning
Using a power adapter with other specifications may damage the product or cause malfunction.
Wireless Charging
- Before you try to charge your device, make sure it is compatible with wireless charging.
- If your device has a metal case, remove it before you put the device on the charger.
- Place your wireless charging-compatible device directly onto the charging pad. Refer to the placement illustrations here as a guide.
Indicator Display
- Power connection successful – blue light flashes twice Standby – light off
- Charging – solid blue light on
- Charged – light off
- FOD – blue light flashes continuously
Important: If the charging indicator light starts blinking, there’s something interfering with the charging. Make sure there are no objects between your phone and the charging pad.
Attention
- 3.1 Using uncertified or incompatible power supplies and adapters may cause fire, short circuit or other dangers.
- Do not squeeze or collide.
- Do not disassemble or put into the fire, water, to avoid short-circuit leakage.
- Do not use wireless chargers in severe high temperatures, humidity, or corrosive environments to avoid leakage of damaged circuits.
- Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure.
- Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices.
- Keep children from the product in case they play with the wireless charger as a toy to avoid accidents.
- Keep the wireless charger and receiver device away from water and other liquids. 3.9 To clean the charger, make sure the power supply is disconnected.
- Usage temperature: -10℃-40℃
- Usage humidity: 20-90% (40℃)
- Pictures in this manual are all illustrations. The final product is subject to fact.
- Inside package: adapter (non-standard), charging cable, manual.
- If you need to purchase or use other adapters by yourself, please make sure to use the QC3.0 adapter.
- It supports PD fast charging.
Specification
- Input: 5V/2.1A, 9V/2.5A, 12V/2A
- Output: 5W/7.5W/10W/15W
- Charging efficiency: ≥75%
- Charging distance: ≤8mm
- Wireless charging frequency: 110-205KHz
- USB Output: 5V/1A (MAX)
- Size: 170x154x22mm
Applicable Devices
Products qualified with Qi standard
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Manufacturer
Shenzhen Shuoyu Technology Co., Ltd.
Address: 30F East Block, Wenhua Bldg, 1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China
Importer: Caliber Europe BV
Address: Kortakker 10 4264 AE Veen, The Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>