RAYCON H20 Wireless Headphones User Manual
- June 6, 2024
- Raycon
Table of Contents
RAYCON H20 Wireless Headphones
INTRODUCTION
Welcome to your new Raycon H20 Wireless Headphones! At Raycon, we develop and design innovative electronics so you can move and conquer your daily fast- paced life. Before using your product, we strongly encourage you to fully read through this user manual. You can also visit our support center at www.rayconglobal.com/support. The web page has more specific guidelines and videos to help you navigate your product. For be5t performance, charge fully before first use.
Pairing ID: Aaycon Headphones H20
QUICKSTART GUIDE
- Press and hold ©, for about 3 seconds to power on. Headphones will enter pairing mode automatically.
- From the source device, go to Bluetooth settings and ensure Bluetooth is on. Search for “Raycon Headphones H20” and select it to pair.
- Enjoy your Raycon H20 Headphones!
UNIT AT A GLANCE
- Volume+/ Next
- Power ON/ OFF
- Volume – / Previous
- Charging port
- Light indicator
- 6u Charging indicator
- Microphone
- ANC/ Awareness Mode/ Sound Profiles
- AUX-IN
INCLUDED
- H20 Headphone
- User Manual
- 3. 5 mm Audio Cable
- USB Charging Cable
FUNCTIONS
- SWITCH CDNIID.
- Power on: Hold for 3seconds
- Power off: Hold for 3seconds
- MEDIA PLAYER CONTROL
- Play: Press
- Pause: Press
- Volume+: Press
- Next: Hold for2 seconds
- Volume: Press
- Previous: Hold for 2 seconds
- PHONE CALL CONTROL
- Answer a Call: Press
- End a call: Press
- Reject a call: Hold for 2 seconds
- Recall the last number: Press 2 times
- AWARENESS & ANC MODE
- Awareness Mode: Hear what’s happening around you.
- Active Noise-canceling (ANC): MOOE
- ANT CONTROL
- Active Noise-canceling: Press
- Awareness Mode: Press
- TURNOFF ANC / Awareness: Press
SAFETY GUIDELINES
Please follow the safety guidelines below at all times when operating or caring for your device.
- Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
- Listen to music at a proper volume to avoid damaging your hearing and headphones.
- Do not store in high features, such as in a hot vehicle or in direct sunlight.
- Do not expo=the headphones or any of its supplied pans to rain or other liquids.
- Do not crop or cause undue impact to the headphones.
- Do not modify, repair, or dismantle the product on your own.
- Do not use any dilutant or volatile liquid to dean the product.
- Do not use the product in a hazardous location.
SPECIFICATIONS
- Pairing Name Raycon H20 Headphones
- Bluetooth Version: S.O
- Power Input: DC5V /IA
- Li-battery ca pa bi I ity: 500 mAh
- Bluetooth Playtime; Aboul22 hours
- Noise-canceling Playtime; About60 hours
- Charging TT me: /\bout2 hours
- Support Profile: A2DP/AVRCP /HFP /HSP
- Frequency i<esPon””: 20Hz-20KH,
- Noise Reduction Parameters: 26 ±2dB
- Bluetooth Operating Range: 10 m
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two a:editions:(l) this device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC l<ules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful I
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure statement. The device can be used in portable exposure conditions without restriction
IC CAUTION:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions,
- This device may not cause interference. and
- This device must accept any interference. including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>