LITIONITE HS300 Portable Power Station User Manual

LITIONITE HS300 Portable Power Station

Thank you for purchasing our energy storage series products. We are striving to create innovative products with extreme safety and excellent performance for you, and we are Please read the user’s manual carefully before using the product to ensure a safe and satisfactory operation.
CAUTION

1. Please keep dry and stay away from fire.
2.  Do not disassemble, puncture or squeeze the portable power station.
3. Please recycle and dispose of the product in accordance with local laws and regulations.
4.  Please hand it over to a professional recycling company to dispose this portable power station.
5. Children and the disabled please use this product with guardian.

SAFETY INSTRUCTIONS AND MAINTENANCE

1.  Please read the manual carefully before using the product.
2. To reduce the risk of injury, please pay more attention when using this product near children.
3. Do not put fingers, palms or any part of your body into the product.
4.  Use the unrecommended accessories may cause fire, electric shock or personal injury.
5. Do not use damaged or modified battery packs or devices.
6. Do not operate the portable power station with a damaged cord, plug or output cable. Otherwise it may cause a short circuit and risk of fire.
7.  Please hand the power station to a qualified service provider for repair or maintenance. Do not disassemble the portable power station by yourself, as wrong disassembly method may cause the risk of fire or electric shock.
8.  In order to reduce the risk of electric shock when the product fails, disconnects the portable power station from the power supply before performing any instructive maintenance operations.
9.  Please charge the product in a well-ventilated place, do not obstruct the air circulation.
10. Under some extremely harsh conditions, liquid may be ejected from the battery. Avoid contact with batteries and liquids.If contacted please rinse with plenty of water.If the liquid comes into contact with the eyes, please seek other medical help.
11. Please do not expose the product to fire or excessive heat.
12. Only repairs by qualified service personnel.
13.  Please do not exceed the specified input AC voltage. Otherwise it may cause product failure,we will not be responsible for providing free maintenance services. Please keep the safety instructions properly.

Introduction

1. Faster Charging from the Wall
   HS300 offers multiple recharging options. Industry-leading 300W High Power AC input lets you recharge in as little as 1-2 hours. or to recharge by car or solar panel Max 90W.Charge the HS300 from the sun with our portable solar panels while away from the grid, and keep it topped off from a wall outlet when you’re home. Integrated MPPT charge controller ensures you’re getting the most efficient solar charge possible.

2. HS300 is a gas-free solar powered generator with versatile port options, and it support to power a wide range of devices with different port options including fast-charging 100W USB-C Power Delivery, multiple fast quick charging USB-A ports, regulated 13.6V, and AC ports.

1.  Handle
2.  AC Output Port
3.  Dust Cover
4. Car Cigarette Lighter Socket
5. DC Output port
6.  LCD Display
7. Led Torch
8.  Led Torch ON/OFF Switch
9.  Cooling Hole
10.  Cooling Hole
11. Ground Connection
12. DC Input port
13.  Solar Panel Input Port
14. DC ON/OFF Switch
15. AC ON/OFF Switch
16. Main Power Button
17. QC3.0 USB-A Output Port
18. PD30W USB-C Output Port
19. PD100W USB-C Output Port
20. USB ON/OFF Switch
21.  Dust Cover
22. AC Input port

Specification

220-240V~,50Hz
XT60| 12-28V/5A ( Max 90W ) Built-in MPPT Solar Charge Controller
DC 5521| 12-28V/5A ( Max 90W )
Inverter Waveform:| Pure Sine Wave
Led Torch| 3W| SOS/Strobe/Light
AC Output:| Rated Power: 300W Peak Power: 500W| 100-120V~,60Hz| US/JP/AU has 2 ports.
EU/UN/CN/UK has 1 port.| Option
220-240V~,50Hz
DC Output:| 2x
USB-C PD| PD 30W ( 5V/9V/3A；12V/2.5A )
PD 100W ( 5V/9V/12V/15V/3A；20V/5A )
USB-A| QC3.0 ( 5V/3A, 9V/2A,12V/1.5A) per port Max.18W
Car Socket| 13.6V/8A, 108.8W Max.| Total Share 8A Max.
DC5525| 13.6V/8A, 108.8W Max.

AC Socket
For the product HS300, the type of AC power socket is subject to relevant regulations of the country and region, the number of socket is also different. There is only one socket with a larger area and two socket with a smaller area.For details,please see the description and picture in the user manual. Although the number and size of socket is different , their operation is the same.

• Europe 1 port
• U.K. 1 port
• Universal 1 port
• Chinese 1 port
• U.S./Japan 2 ports
• Australia 2 ports

LED light panel

1.  Press and hold the main power button for 3S to power on.
2. Press and hold the LED light button for 3 seconds to turn on the semi-bright mode of the LED light.
3. After the half-bright mode is turned on, click the LED light buttons in turn, it will be full-bright, SOS, and strobe modes.
4. After the strobe mode , click the LED light button again to turn off the LED light.
5.  In any mode of the LED light, as long as you press and hold the LED light button for 3 seconds, the LED light can be turned off.

Battery Information indication| a| | Battery Power Level %| d| | Battery failure/Low voltage indicate
---|---|---|---|---|---|---
b| | Battery Power Level| e| | Battery high/low temperature indication
c| | Battery lock protection| | |
Input indication| k| | AC Input| i| | DC Input
j| | Solar Input| t| | Input power
Output indication| o| | AC Output Icon| q| | DC/ Car Outlet Output
p| | USB Output Icon| s| | Output power
Remaining time indication|

l

| |

Remaining discharge / charge time

| l| | Minutes
l| | Hours
Protection indication|

f

| | System failure indication| m| | Overload protection indication
g| | Over temperature indication| n| | Over temperature protection indication
h| | Low temperature indication| | |

How to charge

•  Please charge the HS300 before using.
• Please fully charge the battery before long storage.Please check the HS300 remaining power level every 3 months and full recharge it again.
• There have 3 input ports on the Portable Power Station: 1 AC Input Port, 1 solar panel input port and 1* DC5521 port.

1.  AC Input ：AC power supply can be used to charge Portable Power Station with a maximum power of 300W through the AC charging port.
2.  Solar charging.
3. Car charging.

Solar Panel series/parallel charging

Portable Power Station support Solar Panel charging rated 90W. You can purchase solar panels and dedicated cable accessories that match the Portable Power Station to achieve a high-power solar fast charging experience. CAUTION：

•  The maximum voltage of solar panels that Portable Power Station can support is 28V,and the maximum current is 5A.
• It must be charged by solar panels with a voltage lower than 28V.
•  The input voltage exceeding 28V has the risk of damaging the product.

How to use the AC output function
Under the condition that the total power does not exceed 300W, all ac outlets can work togehter at the same time.

1. Long press the main power button 3S to turn on. The main power indicator and the screen lights up, enters the standby state.
2. Plug in AC appliances.
3.  Tap the AC on/off switch to turn on the AC output function. The product starts to supply power to external AC appliances.
4. Long press the AC power on/off switch to turn off the AC output.
5.  When not using the product for a long time，please long press the main power switch for 3S to turn off to save power.

NOTICE：

• After the AC outlet function is turned on, the LCD Display AC icon will light up first, and then there will be a system check time of 8~10 seconds. After checking that the AC power output function is correct, the AC power output will be performed.

How to use USB output

1. Long press the main power button to turn on. The main power indicator and the screen lights up, enters the standby status.
2.  Click the USB on/off switch to turn on the USB function.
3. Plug in the USB devices and start to use.

How to use DC output

1.  Long press the main power button to turn on. The main power indicator and the screen lights up, enters the standby state.
2.  Plug in the DC device.
3. Click the DC on/off switch to turn on the DC function.
4. After use, click the DC on/off switch to turn off the DC output.
5.  When not using the product for a long time, please long press the main power switch for 3S to turn off to save power.

CAUTION：
When use the HS300 product, please do not plug the DC input cable into the DC output connector. Because this may damage the product.
FAQs

1. Can the product be taken on the plane?
   No, because this product is a products with battery, according to international air transportation standards and regulations, battery capacity products cannot exceed 100Wh.

2. The consumers ’power is within the rated output power range of the Portable Power Station but cannot be used?
   Because the product has a low power, it needs to be fully recharged and used again.

3. Why is there a noise sometimes.
   Because this product uses an air-cooled system, the built-in fan can better help the product to dissipate heat, so it is normal for a slight noise to occur during use.

4. How do I store the product when it’s not in use?
   The portable power station needs to be stored in a dry environment, and the correct storage method can prolong the service life of the portable power station.

5. How do I clean the product if it is dirty?
   Please use a dry non-abrasive cloth to wipe. Do not wipe directly with a wet cloth or chemical solvent. If you want to wipe it more cleanly, we recommend that you use a cotton swab with a small amount of absolute alcohol to wipe. Do not expose the product to large amounts of water.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>