ITC TTC2200 Beach Table Instruction Manual
- June 1, 2024
- ITC
Table of Contents
ITC TTC2200 Beach Table
Product Information
Specifications:
- Model: Beach Table TTC2200-XXC26262-00-SR
- Leg Options: ITC Sand Bar leg or ITC Cypress leg
- Features: Option for table with or without umbrella hole
Product Usage Instructions
Option 1: Beach Table no hole TTC2200-XXC26262-00-SR Installation
- Install Sand Bar leg:
- Sand Bar can be used in sand, water, dirt, loose gravel
- Ensure Sand Bar is secure and post is upright
- Locate the table base on the bottom side of the table
- Align table base with leg post and firmly push on the top center of the table to fully seat the table to the leg post. Load evenly to avoid tipping
Option 2: Beach Table with Umbrella hole TTC22HL XXC26262-00-SR Installation
- Follow steps above for installation without umbrella hole
- Once table is secured to the post, assemble Umbrella pole
- Insert Umbrella in pole through the hole in the table into the leg post
FAQs
Q: Can I use a different type of leg with the Beach Table?
A: The recommended legs for the Beach Table are the ITC Sand Bar leg or ITC Cypress leg for optimal stability and performance.
Q: How do I ensure the table is securely attached to the leg post?
A: Align the table base with the leg post and firmly push on the top center of the table to fully seat it onto the leg post. Ensure even loading to prevent tipping.
ITC Beach Table Installation
Option 1: Beach Table no hole TTC2200-XXC26262-00-SR Install with ITC Sand Bar leg or ITC Cypress leg
- Install Sand Bar leg:
- a. Sand Bar can be used in sand, water, dirt, loose gravel
- b. Be sure Sand Bar is secure and post is up right
- Locate the table base on the bottom side of the table
- Align table base with leg post and firmly push on the top center of the table to fully seat the table to the leg post. Load evenly to avoid tipping
Option 2: Beach Table with Umbrella hole TTC22HL XXC26262-00-SR
- Follow steps above
- Once table is secured to the post assemble Umbrella pole
- Insert Umbrella in pole through the hole in the table into the leg post
To Remove. Table Top:
- Grip table at 3 and 9 and pull straight up
- Table should release – if it is tight, twist table slightly while pulling up
- If it still sticks – depress the black button on the top of the leg post (Cypress leg option only)