RAYCON RBS952 Power Ultra Speaker User Manual

June 4, 2024
Raycon

THE POWER SPEAKER
ULTRA
USER MANUAL

INTRODUCTION

Welcome to your new Raycon Power Speaker Ultra!
At Raycon, we develop and design innovative electronics so you can move and conquer your daily fast-paced life.
Before using your product, we strongly encourage you to fully read through this user guide. You can also visit our support center at www.rayconglobal.com/support.
This web page has more specific guidelines and helpful videos for you to navigate your product.
For best performance, charge fully before first use.
Pairing ID: The Power Speaker Ultra
We are Raycon. We create carefully crafted wireless audio products for go- getters who need tech that keeps up with them.
We teamed up with expert engineers, leading taste-makers, and platinum artists to design products you’ll love to use.
We believe in the early risers and the one-more-milers of the world. Premium audio, inspired by you.

UNIT AT A GLANCE

speakerRAYCON RBS952 Power Ultra Speaker

Control Panel Top View

  1. USB Port
  2. AUX-IN Port
  3. Mic Port
  4. Guitar Port
  5. Charging Port
  6. Power Switch
  7. Micro SD Port
  8. Guitar Settings
  9. Previous
  10. Next / Multi-link
  11. Microphone Settings
  12. Record
  13. Light Show
  14. Repeat
  15. Play/Pause
  16. Treble/Bass
  17. Main Volume
  18. Mode

remote

RAYCON RBS952 Power Ultra Speaker - fig

  1. Mute
  2. Mode
  3. Number Buttons
  4. Guitar Volume +/Sound
  5. Profiles
  6. Echo
  7. +/Previous
  8. Song
  9. Next
  10. Song
  11. Pause/Play
  12. Treble
  13. Treble +
  14. Microphone Volume +
  15. Main Volume
  16. Main Volume +
  17. LED
  18. Light
  19. Microphone Volume
  20. Bass
  21. Bass +
  22. Microphone Treble
  23. Microphone Treble +
  24. Microphone Bass
  25. Microphone Bass +
  26. Microphone
  27. Priority
  28. Repeat
  29. Record
  30. Folder

Features AT A GLANCE

| Party Sound with Customizable EQ
Enough boom to fill any space and a fully customizable EQ to make it sound your way.
---|---
| Four Audio Modes
Listen to your way with four audio modes including Bluetooth, AUX, USB, and Micro SD. No matter the source The Power Speaker Ultra has got you covered.
| Three 1/4″ Inputs (2 Microphone, 1 Guitar)
With the Power Speaker Ultra, you’re not just listening to mind-blowing sound, you’re creating it. Let your voice be heard or play a tune by plugging in a wired mic or guitar.
| Multi-link Mode
The multi-link mode gives you the ability to link 2 speakers together via Bluetooth to create soundscapes that fill your space.
| Liquid Flame Light Show
The Power Speaker Ultra lets you bring the club wherever you go, with 3 awe- inspiring liquid flame lighting effects.
| Three Sound Profiles
The Power Speaker Ultra has three sound profiles that let you control the sound you hear based on the vibe you’re trying to create.

Quick start guide

  1. Power on the speaker and press “ ” until the speaker enters Bluetooth Pairing Mode.RAYCON RBS952 Power Ultra Speaker - fig 1
  2. From the source device, go to Bluetooth settings and ensure Bluetooth is on. Search for “The Power Speaker Ultra” and select it to pair.
  3. Enjoy your Raycon Power Speaker Ultra!

Bluetooth mode

Press “ ” until the speaker enters Bluetooth Pairing Mode and successfully pair with the source device using the Quick Start Guide.

Play/Pause| Press| RAYCON RBS952 Power Ultra Speaker - fig
3
---|---|---
Previous| Press| RAYCON RBS952 Power Ultra Speaker - fig
4
Next| Press| RAYCON RBS952 Power Ultra Speaker - fig 5

Note: The REPEAT button on the remote has no function while the speaker is in Bluetooth mode.

USB/MICRO SD MODE

Insert USB Drive or Micro SD card into the designated port. The speaker will automatically read and play the music in the drive.

Play/Pause| Press| RAYCON RBS952 Power Ultra Speaker - fig
6
---|---|---
Previous| Press| RAYCON RBS952 Power Ultra Speaker - fig
7
Rewind| Hold for 3 sec|
Next| Press| RAYCON RBS952 Power Ultra Speaker - fig 9
Fast Forward| Hold for 3 sec|
Repeat Track| Press| RAYCON RBS952 Power Ultra Speaker - fig
11
Record| Press| RAYCON RBS952 Power Ultra Speaker - fig
12

AUX-IN mode
Press “ ” until the speaker enters AUX mode, and connect the source device to the speaker using a 3.5mm AUX Cable. While the speaker is in JAUX Mode, all media functions are controlled from the source device.

LIGHT show
Press the “ ” button on the speaker or the “LIGHT SW” button on the remote to toggle between the 3 liquid flame light show patterns.RAYCON RBS952 Power
Ultra Speaker - fig 13

Sound profiles

Your sound, your way! As our sound profiles were crafted by artists and producers at the top of the industry, you’re in good hands. Press “ EQ ” button on the remote to toggle between Sound Profiles.

PURE SOUND
Our most refined sound, perfect clarity to hear every single note.| BALANCED SOUND
A leveled sound that is great for all-around performance and clarity.| BASS SOUND
Our bass-boosted sound, is great for songs with strong beats and a go-to for bass lovers.
---|---|---

Multi-link mode
Pair two speakers together with Multi-link Mode.

RAYCON RBS952 Power Ultra Speaker - fig 15| RAYCON RBS952 Power Ultra Speaker - fig 16
---|---
1. Power on both speakers.| 2. Switch speakers into Bluetooth Mode, and ensure they are not connected to any device.
RAYCON RBS952 Power Ultra Speaker - fig 17| RAYCON RBS952 Power Ultra Speaker - fig 18
3. Hold “ ” for 3 seconds on one speaker to enter Multi-link Mode. A voice prompt will indicate if speakers are connected successfully.| 4. From the source device, search for “The Power Speaker Ultra” and select it to pair.
RAYCON RBS952 Power Ultra Speaker - fig 19
5. Enjoy your Raycon Speakers with Multi-link Mode! Hold “
” for 3 seconds to unpair speakers.

Safety guidelines

  • Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
  • Listen to music at a proper volume to avoid damaging your hearing and speaker.
  • Do not store in high temperatures, such as in a hot vehicle or in direct sunlight.
  • Store in a cool and dry area.
  • Do not drop or cause undue impact on the speaker.
  • Do not modify, repair, or dismantle the product on your own.
  • Do not expose the speaker and any of its supplied parts to liquid.
  • Do not expose the speaker to water while charging, as doing so may result in damage to the speaker or the power source.
  • When storing, keep the unit in an upright position.
  • When cleaning this speaker, use a soft dry cloth. For more severe stains, dampen the cloth with water only. Anything else increases the chance of dissolving the paint or damaging the plastic.

FAQ & Additional RESOURCES
Visit: www.rayconglobal.com/support

SUPPORT
If your device is not functioning correctly, please visit www.rayconglobal.com/support for customer support, and we will be more than happy to help you.

LIMITED WARRANTY

Visit: www.rayconglobal.com/warranty

SPECIFICATIONS

Model Number: RBS952
REID: D952-21E-Q321
Bluetooth Version: V5.0
Speaker Size: 8″x2, 3″Tweeter
Speaker Power: 100W
Play Time: up to 10 hours| Bluetooth Pairing ID: The Power
Speaker Ultra
Battery Capacity: 5.5A Lead-acid
Frequency Response: 50Hz – 20kHz
Bluetooth Range: Up to 10 Meters
---|---

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure statement.
The device can be used in portable exposure conditions without restriction
FCC ID: 2AZOV-RBS952

IC Caution:
Radio Standards Specification RSS-Gen, issue 5

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is  subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance  20cm between the radiator and your body.

@rayconglobal

Documents / Resources

| RAYCON RBS952 Power Ultra Speaker [pdf] User Manual
RBS952, Power Ultra Speaker, RBS952 Power Ultra Speaker, Ultra Speaker, Speaker
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals