celect T30 Simple Plug In Thermostat Installation Guide
- June 6, 2024
- celect
Table of Contents
T30 Therma Plug
Therma Plug is designed for controlling a heating appliance to maintain room temperature at a desired level, or for use in frost protection applications.
Plug Location:
The therma plug is restricted to indoor use only. It should be placed
vertically and plugged in at the socket in a position where it is readily
affected by changes of the general room temperature, with freely circulating
air. Avoid using it near hot surfaces or equipment(e.g. TV, Heater,
refrigerator), and exposure to direct sunlight, Do not use this unit in wet
rooms or expose this unit to dripping or splashing.
Operation:
-
Plug the Therma Plug at the socket.
-
Temperature setting up:
• Select the desired temperature by rotating the rotary knob and by reading the LCD display with the icon.
• Return to room temperature display after 10 seconds with the icon disappears. -
Plug the required control equipment on the Therma Plug.
Installation.
Caution: Switch off the electric source before installation. Maintenance should be performed by trained personnel.
Technical Data:
| Temperature Range: | -5 ~ + 25°C adjustable |
|---|---|
| Rating: | 230VAC 50/60Hz 13(3)A max |
| Frequency: | 50/60Hz |
| Switching Differential: | Approx. £0.5°C |
| Operating Voltage: | 230VAC |
| Time Constant: | Approx. 2 min. |
| Operating Temperature: | -20 – 50°C |
| Storage Temperature: | -25 – 60°C |
| Operating Humidity: | 5 to 90% non-condensing |
| Type of disconnection: | Type 1B |
| Pollution degree: | 2 |
110816
Documents / Resources
|
celect T30 Simple Plug In
Thermostat
[pdf] Installation Guide
T30, Simple Plug In Thermostat, T30 Simple Plug In Thermostat, Plug In
Thermostat, Thermostat
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>