ACEFAST A25 Fast Charge Wall Charger User Guide
- June 6, 2024
- ACEFAST
Table of Contents
ACEFAST A25 Fast Charge Wall Charger
Product Diagram
Package Contents
- PD20W (USB-C+USB-A) dual port charger
- User Manual
Thank you for purchasing the PD20W (USB-C+USB-A) dual port charger. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number
Specifications
| Max output | 20W Max |
|---|---|
| Input | AC100-240V~0.6A 50Hz/60Hz |
| Output C1 | DC5V 3A, 9V 2.22A, 12V 1.67A (20W Max) |
| Output A1 | DC5V 3A, 9V 2A, 12V 1.5A (18W Max) |
| Output C1+A1 | 15W Max |
Getting Started
- Plug the charger into a wall outlet.
- Connect a charging cable (not included) to your device charging port.
- Connect the other end to an output port on the charger.
- Unplug your devices when fully charged.
Use environment
- Working environment temperature: use at altitudes below 2000 meters and under non-tropical climate conditions.
- The device is only suitable for indoor use.
- Storage temperature: -20 ℃ to 40 ℃.
Note:
Please read all instructions and warnings before using this product. Improper use will cause damage to the product.
- Do not store this product under high temperature, strong light and strong magnetic environment, do not place it in other harsh environments such as fire source to avoid heat, combustion or electrical shock.
- When over-voltage, over-current, or over-temperature occurs during charging, the charger will automatically stop charging to avoid damage. When returning to the normal state, charging will continue.
- Do not disassemble, repair or modify this device by yourself.
- Do not touch the power adapter with wet hands or immerse it in water or other liquids.
- Do not use the power adapter for products higher than the output range of this product to avoid electrical shock, burning or damage to the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>