iStorage 11223344 QSG Flash Drives Instructions

iStorage 11223344 QSG Flash Drives

CHARGING

The device may need to be charged before use for 30-60 minutes by inserting into a powered USB port.

PIN

Your device ships with the following default User PIN: 1 1 2 2 3 3 4 4

FOR SECURITY, CHANGE THE DEFAULT PIN! PIN can NOT contain consecutive or repetitive numbers e.g. 1 2 3 4 5 6 7 or 3 3 3 3 3 3 3

How to unlock the drive

1. Press the button
   all LEDs   will flash together once and then the   LED will blink.

2. Whitin 10 seconds enter the User PIN (default PIN: 1 1 2 2 3 3 4 4) and press button.
   LED will be solid for approxi-mately 2 seconds and then change to solid LED.

3. Connect your device into a USB port within 30 seconds.
   LED will remain solid, LED will flicker and turn to solid.

4. The device can now be accessed as any other USB storage device.

5. To lock the device, save all data and safely eject the drive.
   All indicators will turn off and the drive is now locked.

How to change User PIN

1. Press the   button.
   all LEDs  will flash together and then the    LED will blink.

2. Enter User PIN (default PIN: 1 1 2 2 3 3 4 4) and press button.
   LED will be solid for approx-imately 2 seconds then change to solid  LED.

3. Press the   button twice.
   LED will blink.

4. Within 10 seconds enter New User PIN (7-15 digit) and press button   twice.
   LED will blink.

5. Re – enter New User PIN and press the button twice.
   LED will illuminate and then change to solid  LED if PIN entries match.
   LED will be solid if PIN entries not matched.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>