YONGNUO YN360 III, YN360 III Pro Pro LED Video Light User Manual

YONGNUO YN360 III, YN360 III Pro Pro LED Video Light

Thank you for using the YN360 III LED video light. Please read the manual carefully and keep the user manual properly for reference.

Function Introduction

1. YN360 III is YONONUO’s brand new LED video light which brings you a more powerful fill light brightness and wider fill light range, with easier ROB mode adjustment to meet your various fill light needs.
2. YN360 III uses a combination of 360 high-definition lamp beads and 60 ROB full-color patch lights
3. The YN360 III is equipped with a proprietary multi-channel wireless remote control that easily adjusts the ROB mode via the remote control touch screen, ma. king ROB mode adjustment easier. At the same time, it supports the frequency division control of 8 groups of video lights.
4. YN360 III supports a mobile phone APP to control the LED video light, reads the brightness and group channel of the current LED video light, can control the switch and brightness of 8 groups of video lights separately, and easily complete the photography needs.
5.  YN360 III supports dual power input, supports NP-F series battery, and external DC power supply, to meet the needs of your various environments.
6. YN360III adopts YONONUO proprietary LED constant-current drive technology, will not appear ripples or stroboscopic phenomena during the shooting,

precautions

1. This product should be used in a ventilated environment. Please make sure the heat emission hole won’t be blocked when you are using this speed-lite.
2. Do not disassemble the product, maintenance or repair of this product should be carried through by technical maintenance personnel of our company or technical maintenance personnel authorized.
3. When the equipment is running. do not look into the light directly and closely.
4. Do not use this product in a flammable and explosive place, or where it can be exposed to moisture.
5. Please keep this product away from the children.

Production Specification

3200K 5600K color temperature

5600K color temperatureYN360 III PRO

YN360 IIl PRO
3200K. 5600K color temperature

Product Structure

Installation and fixed

1. Battery Installation When installing the lithium battery, please put the battery into the slot in the direction of the arrow.
   Note: NP-F series battery is applicable, please remove the battery when not in use.

   • When removing the lithium batteries, please press the battery lock and then take lout the lithium batteries.

2. External power supply It is recommended to use the YONGNUO power adapter with YN360 III to obtain lasting service time. When using an external power supply, the video light will stop the battery power supply automatically and will not get the battery charged. The external power is negative and the interface inside is positive. The input voltage is 12V and the electric current is 2A.
   Note: If YN360 III defective ly inter face outside is when it is used with power adapters of other brands, YN360 III will no longer be guaranteed for repair.

3. Put the remote control into the video light card slot to use. When the remote controller is not equipped with batteries, insert the remote controller into the video card slot, you can use it when the remote control iron plate and the camera light magnet are absorbed together. If remotely controlling the video light is needed, install a CR2032 battery to the remote control.

4. Fasten the video light as follow as needed: Fasten the video light to the tripod directly.

Method Application

1. Startup & Shutdown Button Install the batteries or insert the DC power supply, and then press the power switch, and the LED video light lights up. Put the remote controller into the LED video light and use it to adjust the brightness.

2. Power test Insert the remote control into the video light card slot, the remote control displays the battery power for the video light. The battery power is 41% to 60%
   as shown below.

3. Coarse/Fine adjusting Switch Button Fine/Coarse Tune Mode Press the fine/coarse tune button on the remote controller to switch the tune mode. When the tune mode is switched to coarse tune mode, the adjusting unit of the brightness is 10%; when it’s fine tune mode, the adjusting unit is 1%.
   Note: Press and hold the 2-second coarse/fine button to lock the touch screen to avoid mistake touch; long press again to unlock.

4. Switch color temperature mode Press the left and right buttons of the remote control to switch the color temperature mode.

5.  Channel switch button

   • Put the remote controller into the card slot of the video light, short press [the CHJ button on the controller, and, the video light and the controller synchronously CH+, the controller will be switched to the channel needed. When you take the controller off, the channel of the video light and the channel of the controller is consistent.
   •  For example, if the channel of the controller is switched to channel H2, the channel of the video light is CH2; when you take the controller off, the channel of the video light is as well CH2. To switch the channel of the video light, the remote controller should be inserted to the card slot of the video light.
   • If you possess several YN360 II, you can group control the brightness and switches; the groups at most is 8 groups. (The LCD screen of the remote control can display the number of CHI-8.  the number corresponds to the corresponding channel, you can change the channel through the CH button. )

6. Mobile APP Remote Control The product supports mobile remote control, the APP can be downloaded from the YONGNUO official website or downloaded by scanning the two-dimension code on the gift box, Mobile phone APP will be updated continuously. Please pay attention to YONGNUO official website for the latest version of APP to get better remote control experience.

7. Special Scene Supplementary Lighting Mode

8. Long press the CH button for 2 seconds to enter special scene mode,F0 displays.

9. Short press the CH button to switch F0-F9 (10 scenes) o the left right button to switch 10 different scenes.

10. hot press the coarse/fine-tuning switch button to pause or start the special scene supplementary lighting.

11. Long press the CH button to exit or power off and exit

  * FO.Simulates lightning
  * F1.Simulates movie screen reflecting light
  * F2.Simulates candlelight
  * F3.Simulates sunrise
  * F4.Simulates firework
  * F5.Rapid cycle among red, green, and blue
  * F6.Slow cycle among red, green, and blue
  * F7.Simulates a police car light
  * F8.Simulates ambulance light
  * F9.Simulates fire fighting truck light

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Class B device
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
   and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The functions in this manual are based on the test conditions of our company. Further notice will not be given if the design and specifications change.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>