REDRAGON K598-KNS Knight Mechanical Gaming Keyboard Instruction Manual

Table of Contents

REDRAGON K598-KNS Knight Mechanical Gaming Keyboard Instruction Manual

REDRAGON K598-KNS Knight Mechanical Gaming Keyboard Instruction
Manual

Dear user

Thank you for choosing our product. To protect your rights and for better customer service, we ask that you note our warranty rules.

Within guaranty period, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
Consumable parts (such as foot pad) and spare parts replacement are not included in our warranty.

Windows XP Vista/Win7/Win8/Win10

Wired Connection

Take out the USB A to USB Type-C cable in the package and connect the keyboard with your computer.
The computer will recognize and configure the keyboard automatically.
The keyboard will be ready for use when the configuration is finished.
Once the keyboard is powered up, charging begins. It may take about 5 hours for the keyboard to be fully recharged.

Wireless Connection

Slide the ON/OFF switch on bottom of keyboard to ON.
Take out the Nano USB receiver in the package and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
The keyboard will be ready for use when the configuration is finished.
In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FN]+[P], plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.

Warning: Charging Input: 5V=1A

REDRAGON K598-KNS Knight Mechanical Gaming Keyboard Instruction Manual -
Function Combination Keys

Standard USB A plug for connection with computer. Plug and play without drivers or software installation.
Multi-level back: light brightness: Press and hold the [FN] +[j]/U] to increase or decrease back: light brightness of the keyboard.
There are 18 backlighting effects. Press the combination keys repeatedly to change the light effect:
[FN] +[Insert]: 1. The trial of light; 2. Breathing; 3. Normally on
[FN] +[Home]: 1. Ripple Graff; 2. Pass without Trace; 3. Coastal
[FN] + [Page Up]: 1. Hurricane; 2. Accumulate; 3.Digital Times
[FN] + [Del]: 1. Go with the stream; 2.Cloudsfly; 3. Winding Paths
[FN] + [End]: 1. Flowers blooming; 2. Snow winter jasmine; 3.Swift action
[FN] + [Page Down]: 1. Both ways; 2. Surmount; 3. Fast and the furious
Press [FN]+ [WIN] to Disable or enable the [WIN] and right menu key so as to avoid mis operation in game.
Alterable backlight changing direction: Press [FN] +[–]to alter backlight changing direction.
Changeable backlight colors: Press [FN]+[->] to change backlight colors (9 color selections).
Adjustable lighting speed: Press [FN]+ [-] or [FN]+ [+] to decrease or increase backlight moving speed.
Switch side light pattern: [FN]+[PAUSE]
Adjust side light speed: [FN]+[Scroll] total 5 level.
Wireless keyboard pairing: [FN]+[P].
Reset to default setting: FN+[PRTSC].

If the keyboard doesn’t respond, please check if the keyboards USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
If you spill liquid on the keyboard, please remove keyboards USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using again.