FANGOR F-701 Full HD Projector User Manual
- June 6, 2024
- FANGOR
Table of Contents
FANGOR F-701 Full HD Projector
Safety Instructions & FCC Warning
Important Safety Instructions
- Please use the included AC power cable to power the machine. Only use the included accessories specified by the manufacturer.
- It is normal for the machine to generate heat during operation. To prevent overheating, do not block the ventilation openings.
- CAUTION : Do not look straight into the projector lens while on, as it may cause serious eye damage. Do not touch the lens. ec1ean only with a dry cloth.
- To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on these devices, as it may lead to potential accidents that damage the device.
- Protect this device from overexposure to direct sunlight, heat, big temperature fluctuations, and moisture. Avoid extreme temperatures. The suitable operations and storage temperature for this device and its accessories are 0°C to 35°C / 0°F to 95°F.
- Avoid any type of impact, as it may damage the internal components.
- Do not make any repairs to this device by yourself. Our company will not cover the warranty if self-repair efforts were undertaken.
- Please contact the seller for technical support when the product has any type of problem, Contact details are revealed at the end of this manual.
FCC Warning
Warning : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
fora Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radionY technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Package Listing
Remove & Close The Lens Cover
- Remove the lens cover before using Close the lens cover when unit not using
Boot Operation Guide
TURN ON
- Plug the projector F-701 into a power source. Indicator light: Red.
- Press the power button~. Indicator light: Green
- The projector turned on after 5 seconds.
TURN OFF
- Turn off the power button~
- Unplug the power adapter.
Note : Please turn off the projector before unplugging the power source, so as not to affect the life and operation of the projector.
Distance Between The Projector And Screen
| Projection Distance | 1m | 2m | 3m | 4m | 7m |
|---|---|---|---|---|---|
| Projection Size | 35 inch | 65 inch | 100 inch | 150 inch | 300inch |
Light, brightness, etc. will affect the projection distance, this data is for
reference only.
Projection Position
It is recommended to place the projector in front of the center of the screen.
Viewing Options
The projector can be used to project onto a wall or screen, mounted from the
ceiling or on a table, When projecting from the rear position, a special
screen will be needed (not included) to display the image. Be sure to aim the
remote at the sensor on the front or rear of the projector.
Placing Your Projector On Ceiling
When installing the projector in the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount. Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial.
NOTE : Projector mount and screw(s) not included
Adjust the Vertical Location
Follow below picture to adjust the vertical location
Adjust the Focus and Keystone
-
As shown in Picture, Rotate the edge of the lens until you get a clear picture.
Note : Please avoid touching the lens. If you touch it accidentally,Please wipe with the cleaning cloth in the accessory bag.
-
Keystone Correction on the remote control
Path 1: On the remote control, press ■ t ◄ or ► t ■ .
Path 2: Click “SETUP” -select “Option”-click “Keystone Correction”-Adjust by Up • and down T keys on remote control.
Functional Overview
- Source
- Return
- Left
- Down
- OK
- UP
- Right
- Menu
- Power On/Off
- IR Window
- Lens
- USB Port
- HDMI 1 Port
- HDMI 2 Port
- AV Port
- Audio Port
- Micro SD
- IR Window
- DC Port
Controls of Remote
| (!) Power | Press to power ON. Press and hold to power OFF. |
|---|---|
| ■ I ◄ ► I ■ | Press for keystone correction. 0° to ± 22° |
| 1 11,. | |
| • • | |
| ®Play/Pause | Press to play or pause an individual chapter or track |
| Arrows/OK | Press to navigate and confirm selections in Settings and |
other menus
@| Press to access projector Settings
GoTo
Number Keypad
| Press to enter specific chapter or track numbers. Use play button to begin
playing
MUTE| Press to mute volume
back/fwd
| Press to reverse or fast forward during playing video/music
VOL+NOL-| Press to adjust audio level.
SOURCE| Press to select media source (AV, PC, HDMI, MEDIA).
EXIT| Press to exit menus.
ZOOM| Zoom with X/Y axis; Scale: 0-10.
Install Remove Battery Of Remote
Remove the battery compartment cover on the back of your remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct batteries (2XAAA batteries not included), referring to the polarity markings. Finally, replace the cover.
NOTE:
- Batteries shall not be exposed to excessive heat such as sunshine, fire.
- Make sure that the batteries are installed polarity correctly.
- Only same or equivalent type batteries as recommend are to be used.
- Do not dispose of batteries in fire, battery may explode or leak. Do not try to recharge a battery.
- Do not mix old and new batteries.
- Do not mix alkaline, standard(carbon-zinc), or rechargeable (ni-cad,ni-mh,etc) batteries.
Connection Instructions
Select an Input source
You will see the picture below when the projector is turned on. You can choose
between the different input sources (AV/ HDMl1 / HDMl2 / Screen Mirroring/
Media Player) by pressing the ” Source ” button at the projector touch panel,
or remote controller. You can connect different devices with the projector.
according to the following connection instructions.
HDMI device connection
The projector can connect to devices with HDMI input function. It is compatible with laptops, DVD players, Blu-ray players, Chromecast, TV Stick, etc. An HDMI cable is included. The F-405 projector is equipped with 2 HDMI input ports,
- If you connect your devices to the projector via “HDM 1” port, please choose “HDMI 1′ input source.
- If you connect via the ” HDMI 2″ port, please choose the ” HDMI 2″ input source.
Multimedia connection
Insert USB / Micro SD card ( TF card) into the corresponding slots (as shown
in the picture). Choose Media source, Select” Video “, • Music “, • Picture •
to enter the content you want to play.
AV video device connection
Connect the projector AV interface with the AV cable, as is shown in the
pictures.
Audio devices connection
The projector can connect to a headphone and to a wired audio system using a
3.5mm jack ( not include)
Using Bluetooth playback
Bluetooth On/Off| Bluetooth is OFF by default when the projector first powers
ON
---|---
Pairing to Bluetooth Wireless Speaker
| Turn on Bluetooth. The projector will begin searching for a nearby
Bluetooth device, choose one and connect successfully.
When successfully connected, the projector will display the Bluetooth name on
the top right portion of the Main Menu screen, and ou will be heard through
the Bluetooth receiver
Attention
The Bluetooth function only supports audio devices.
Smart phone, tablet, or computers can not connect to the projector! ! !
About automatically connect.
After the initial pairing, The device will keep the pairing status all the time when Bluetooth functions for both devices are opened.
To ensure that you can hear from the projector next time, we suggest that turn off the Bluetooth function before the turn off the projector.
When you try to connect a new blue tooth speaker
please turn off the previous speaker /headphone and re-search your new Bluetooth device for connecting.
iOS device without Wifi environment.(Use the phone’s network data)
Step 1: Turn on the projector and press the 11source11 button on the remote control or projector’s button. Click to enter the 11Screen Mirroring11 on the projector. (Loading time 5-1 O seconds)
Step 2: Open the WiFi function on your smartphone/pad, and connect to the
projector’s SSID(name and password showed on the screen)
Step3: Choose 11Cellular Data11 and turn on it.
Step4: Open the Screen Mirroring, and choose the correct SSID name. Then
the connection is succeeded.
Wireless Connection to Android Phone.
For Android device, considering there are two different operating environments
:
- With WiFi environment.
- Without WiFi environment.
A: Android device with WiFi Environment.
Step1: Turn on the projector and press the 11source11 button on the remote control or projector’s button. Click to enter the “Screen Mirroring” on the projector. (Loading time 5-10 seconds)
Step 2: Open the WiFi function on your smartphone/pad, and connect to the
projector’s SSID(name and password showed on the screen)
Step 3: Enter the URL:http:f /192.168.203.1 on the browser(or scan the QR
code)
Step 4: Connect your home WiFi on the browser page.
Step5: Open the Multi-screen/ Miracast” function on the Android device.
Step 6: Choose the correct SSID name, then the connection is succeeded.
Due to the diversification of Android Phone, when you open the Multi-screen
function, there may appear two WiFi names.
How to choose?
- Choose the one with the WiFi logo.
- If there is no WiFi icon, the first one is selected by default.
Tips : When you connect for the second time, Switch the projector to the 11Screen Mirroring11 page, and click the 11Screen Mirroring11 on your phone, the connection is successful. (No need to perform the Step 1-4)
B: Android device Without WiFi environment.{Use the phone’s network data)
Step1 : Turn on the projector and Open the 11source11 with the remote
control or projector’s button. Click to enter the 11Screen Mirroring11 on the
projector. (Loading time 5-10 seconds)
Step 2: Click 11WLAN11 on your Android device, turn on the 11WiFi-Scan11
function, But do not connect any WiFi.
Step 3: Choose “Phone Network Data” and turn on it.
Step4: Open the Multi-screen/Miracast on your Android device, choose the
correct SSI name.Then the connection is succeeded.
Note
Conditions for WiFi connection| Please make sure the home network environment in well conditions
The Name about “Screen Mirroring”
| Different android devices have different names for the Wireless sync display,
such as Screen mirroring , Screen sharing, Multi-Screen etc. If you cannot find it, please consult your mobile phone supplier.
Wireless connect without WiFi
| Please turn on the WiFi in your smartphone, but do not Connect ANY WiFi! Otherwise it will affect the projector’s WiFi Signal.
Wireless connect without WiFi
| Please turn on the WiFi in your smartphone, but do not Connect ANY WiFi! Otherwise it will affect the projector’s WiFi Signal.
12:20
| ****
,111 “=” l!!!!C
| Set up when you scan the QR code(or enter the URL in the browser) (DUse the
IP connect to you Home WiFi.
X Websetting| •••| @Device Name can be modified.
lntemet I St123456 I| @WiFi Password can be modified.
iOS Docking Mirror+Streaming| When you change the Device
Name and WiFi Password, you need to restart
Device Name Dualcasl-2677E9A9
| the projector, SSID and PSK will be updated; Needs to re-click the screen
WIFI Password 30661287| mirroring on your phone and connect
it.
| ©If the home WiFi is modified, please re-scan the QR code to connect WiFi.
Display game| ®Before the connection is
successful, please make sure that mobile phone
Resolution 1920×1080.60P
•
•
•
| network data is turned on.
®All the tips(<D-®)above for wireless connection to iOS/Android. (With WiFi environment)
About turning on the projector
| ****
The projector has a memory function, when you turn it back on, it will display the page before shutdown by default.e.g. If you were using HDMI before shutdown, it will automatically enter HDMI model in the next time restart.
Wired Connection to Smartphone/Pad
Wired Connection to iOS. (iPhone/iPad)
Step1: Turn on the projector and pres the 11source11 with the remote control or projector’s button. Click to enter the 11Screen Mirroring11 on the projector. (Loading time 5-10 seconds)
Step2: Connect your 1OS device with the projector1s USB port via USB to
Lightning Cable.
Step3: Click 11Trust11 and input your screen lock password. If no
password, ignore it.
Wired Connection to Android Phone.(Need to download the APP: MiraPlug
Step1: Turn on the projector and Open the 11source11 with the remote control or projector’s button. Click to enter the 11Screen Mirroring11 on the projector. (Loading time 5-10 seconds)
Step2: Connect your Android device with the projector1s USB port via USB
to Micro/fype C Cable.
Step3: Choose USB Transfer Method(Transfer files)and open USB debugging.
Step4: Follow the prompts of the APP.
- Download MiraPlug;
- Re-plug the USB Cable to activate the APP;
- Click ,Connect Bluetooth according to the prompt tone (Bluetooth name : PJ-BTI;
-
-
-
Back to UI interface.Then the connection is succeeded.
NoteWhen download the app| The Android phone may prompt that the app not safe, Please ignore this prompt, and continue to download.
-
-
About turning on the projector
| The projector has a memory function, when you turn it back on, it will
display the page before shutdown by default.e.g. HDMI is displayed before
shutdown, and HDMI is automatically displayed on the next time.
Tips for wired connection| After entering the screen Mirroring, we suggest to
plug the USB into the projector first, and then connect the phone to the USB
cable.
If the connection is accidentally disconnected and the phone
does not reconnect successfully, please restart the projector.
FAQ
Q: Why can my projector not be turned on?
A: Please be sure that the AC power cable is plugged in tightly, and press the power switch on the projector1s panel or use the remote controller to turn it on.
Q: The projector is turned on, but no image is displayed
A: CDPlease make sure your device is connected to the projector correctly. @Check the lens cover has been removed.
@Check if the input signal source is correct, and then switch into projection mode, Wait for a while and operate it again.
@Please make sure that the video source is equal or under 1080P
® If it is still not working, please contact us for further support.
Q:The Lamp ( Bulb ) switches off after a period of time.
A:1. Leave the projector to cool for a few moments.
2. Once cooled, check if anything is blocking the ventilation vents.
3. Turn on the projector.
If the issue persists please contact us.
Q: When playing a video, is see the image but I hear no sound
A: If you connect to your laptop via a HDMI adapter. The audio cable of the adapter needs to be plugged into the audio output port from your laptop to the projector using a 3.5mm audio jack.
Q: The projection is not bright enough
A: We recommend using the projector in a relatively dark environment to bring out the best image brightness.
This project is designed for Home Entertainment and s not recommended for Power point or other business presentations.
Q: Spots on the screen.
Using a vacuum cleaner to dean the lens. If cleaning does not resolve things, please contact your support provider for further assistance.
Q: I get a blurry image?
A: The recommended projection distance is 3-5m. Please adjust the Keystone correction to get a rectangular image first, then adjust the Focus to get a clear image.
The optimal focus is obtained when the pixels are clearly visible. If the projection size is too large, the focus near the screen edges may be less sharp than at the screen center.
Q: My projector noise is too loud, is it broken?
A: The projector noise comes from the fan of its cooling system . Projector generates heat during operation as the light bubble produces strong light to make a bright image. It is normal for the projector to make a loud noise. Brighter the image .louder the sound is. You can place the projector far from where you are, or you can connect a louder speaker to the projector to cover up the noise.
Q: Bluetooth not work.
A:Please note the Bluetooth function is not support to connect with a smartphone or pad etc.
If the Bluetooth speaker or earphone is not able to connect, please contact our customer service, we will help to solve soon.
Q: After scanning the QR code, it prompts to upgrade the system? A:We
will continue to improve customer experience based on market feedback (such as
mobile phone system upgrades), so we will upgrade (irregularly).
Q: Can you adjust the brightness/Sharpness of the video?
A: Path: Set up (Click “Source”)-Picture-Picture Mode(Choose “User”)-Adjust via remote control .For non-professionals, we recommend using the default value.
Need to know more…..
Email: [email protected]
Website: www.fangor-store.com
You can find the operation video on FANGOR official website.
Specifications
| Light Source Type | LED |
|---|---|
| Display Native Resolution | 1920 x 1080P |
| Supported Video Resolution | 1080p, 1080i,720p, 576i,480p,and 480i |
| Power Input Connect Included Adapter | **** |
DC 19V 7A
Included Adapter Connect DC input of the unit| Input AC100-240V , 50/60HZ;
Output DC19V, 7A
Display Color| 6000K 9000K
Dolby Sound| Support
Keystone| ±45°
Connect Types| HDMI / USB / Micro USB(TF) /AV/ Audio
Input| HDMl2 / AV1 / Micro USB(TF) 1 / USB
Output| Audio Out 1/Bluetooth
USB Port| Support USB device up to 128GB
SD Card| Support SD card up to 128GB
Supported image format| .jpg.png.bmp
Supported audio formats| .mp3.wma.ogg.aac*.flac
Supported video formats
| .avI’ .flv .rmvb .mkv .mp4 .mov .mpg .mpeg . ts .tp.vob
Weight| 2.46kg
Dimension| 304.5103253mm
Warranty
Customer support
If you have any questions about this projector, please contact us.
Email:[email protected]