FANGOR 10’’ Dual Car DVD Player Portable Headrest CD Players-Complete Features/Instruction Manual
- June 5, 2024
- FANGOR
Table of Contents
FANGOR 10’’ Dual Car DVD Player Portable Headrest CD Players
Specifications
- PRODUCT DIMENSIONS : 9.1 x 5.1 x 12.2 inches
- ITEM WEIGHT : 4.23 pounds
- BATTERIES : 1 Lithium Metal batteries
- OTHER DISPLAY FEATURES: Wireless
- WIRELESS COMMUNICATION TECHNOLOGIES: IR
- CONNECTIVITY TECHNOLOGIES: USB/SD, AV
Introduction
This dual vehicle player features two strong stereo speakers for a superb listening experience. There are two 3.5mm standard earphone ports on the device, which can be used to connect headphones or car speakers. The break- point memory allows you to resume where you left off. To start from the beginning, press “SETUP” and make sure “Last Memory” is turned on at the general setup page.
While not using the player for a long period, you might pause the movie and then hit the DISPLAY ON/OFF button on the remote control. The ON/OFF button on the top of the monitors can be used to totally turn it off. Make sure the DC/AV wires are connected correctly and they will play the same movie if you have dual DVD players with one player and one LCD screen. There are two mounting brackets and two headrest straps are included, allowing for easy installation in the backseat of a car. The 1024*800 HD screen is clear, and you may change the volume to 20 by touching the player or using the remote. With previous memory support, you may always pick up where you left off the last time you played. There is a protection sticker from the tab on the screen; removing it before use has no effect.
What’s in the box
- Main DVD Player
- Slave Monitor
- 2 Mounting Brackets
- 2 Headrest Straps
- AC Adapter
- Car Charger
- AV Cable
- DC Cable
- Remote Control
- RCA Cable + 1 User Manual
How to connect one tab with other
You can connect and use the FANGOR in your cars and homes as well. You can connect them by using the following steps:
- Fold the screen upwards and insert a DVD if you want to watch a movie through DVD.
- Insert the AV out cable in one tab.
- Connect the other side of the cable to the other side of the tab.
- Your tab will be connected with each other.
How to connect with TV
You can even connect with TV by following the given steps:
- Insert the AV out cable to the jack of the Tab.
- Insert the second end with the RCA connector to the TV.
- Your TV will be connected to your tab.
Frequently Asked Questions
-
Is it possible to use a Fangor projector with your smartphone?
IOS and Android systems are compatible with the latest Wi-Fi connection capability. You won’t need to convert cables with this wireless projector. You only need to connect your device to the home projector once, and then you can use it whenever you want. -
Why isn’t there any sound on my projector?
The following are the most typical reasons why your projector may lack sound: The music has been muted. Ensure that the projector’s volume is turned up by checking the volume control. Check the volume control on the source device if you’re connected by HDMI or USB-C. -
Is it necessary to have speakers with a projector?
A widespread misconception about projectors is that they require external audio. Modern projectors, on the other hand, not only have excellent inbuilt speakers, but they also offer improved audio, making a separate hi-fi system unnecessary. -
Do projectors have Bluetooth capabilities?
However, because Bluetooth audio isn’t standard on all projectors, you’ll need to check to see if the one you have or wish to buy supports it. The difficult aspect here will be ensuring that the precise projector type you’re planning on using has Bluetooth. -
Is blue light emitted by projectors?
Blue light is produced by projectors, but because you will not be staring directly at the light source while viewing, it will not contact your eye directly.