Govee H6121 RGB LED Strip Lights User Manual

June 6, 2024
Govee

Govee logo H6121 RGB LED Strip Lights
User Manual

Safety Instructions

Read and follow all the safety instructions:

  • The product is not water-resistant, be cautious when installing and using.
  • Use the product with the provided power adapter only.
  • Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
  • When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s life span.
  • Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
  • Do not install the strip lights near any heat sources.
  • Do not allow children to install the strip lights alone.
  • Avoid installing the strip lights near potentially dangerous sources (e.g. candles, liquid-filled objects).
  • Unroll the strip lights before powering them on.

Introduction

Thanks for choosing the Govee RGB LED Strip Lights. This product is equipped with a 10m RGB strip light and supports app, voice (Alexa/Google Assistant) control.

What You Get

LED Strip Lights 1
Adapter 1
User Manual 1
Service Card 1

At a Glance

Govee H6121 RGB LED Strip Lights - At a Glance

Installing Your Device

Before You Install

  1. Unpack the box and check all items listed in the packing list.
  2. Power on the strip lights and check whether they light up.

Installing Steps

  1. Wipe the surface to make sure it’s clean and dry.

  2. Peel off the protective film on the tape, stick the strip on and press over it firmly.

  3. Reinforce via clips around corners.
    Govee H6121 RGB LED Strip Lights - Installing Steps 1

  4. Peel off the protective film on the control box and stick it on

  5. Power on the strip lights and start using.

Pairing Your Device with the Govee Home App

What You Need

  • A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/nbands. GHz is not supported.
  • A smartphone or tablet running i0S 8.0 (or above) or Android 4.3 (or above).

Pairing Instructions

  1. Download the Gove Home app from the App Store (i0S devices) or Google Play (Android devices).
  2. Turn on Bluetooth on your smartphone
  3. Open the app, tap the “+” icon in the top right corner, and search for “H6121”
  4. Tap the device icon and follow the on-screen instructions to complete the pairing.

Govee H6121 RGB LED Strip Lights - Pairing
InstructionsControlling the Device with Your Voice

  1. Open the Govee Home app, then tap the device icon to enter the details page.
  2. Tap the settings icon in the top right corner.
  3. Select Using Guidance and the onscreen instructions to control the device using your voice.

Specifications

Length 32.8ft /10m
Light Color RGB
Water Resistance NO
Control Method App, Control Box, Voice Control
Power Supply Adapter 12V

Troubleshooting

  1. The adhesive tape is not strong enough.
    • Make sure the installation surface is clean and dry
    • Firmly press over the strip after sticking.
    e Reinforce the installation via more clips and tape.

  2. Cannot connect to Bluetooth.
    • Do not skip Bluetooth connection in the app.
    • Ensure Bluetooth on your smartphone has been turned on.
    • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
    • Power the strip lights and your smartphone Bluetooth off then on, then try again.
    • Ensure that your smartphone is within 1 m/3.28ft of the strip lights when connecting.
    • Clear any obstructions that are between the strip lights and your smartphone.

  3. The strip lights do not display the full selected color/Some
    LED beads do not light up.
    • Please contact the Govee support team for rapid product replacement.

  4. Cannot sync the strip lights to the beat of my music.
    • Move the control box closer to the music source.
    • Clean the mic on the control box then try again.

  5. Cannot connect to Wi-Fi.
    • Do not skip the Wi-Fi connecting steps in the app.
    • 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
    • Connect your phone to Wi-Fi and check whether the network works well.
    • Make sure you have entered the correct Wi-Fi name and password.
    • Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
    • Connect your smartphone hotspot to the strip lights and check whether the router works with the strip lights

  6. Cannot connect to Alexa.
    • Unplug every connective part of the strip lights the firmly reconnect them.
    • Reset your smartphone Wi-Fi.
    • Unplug the adapter port then replug it.

Customer Service

warranty: 12-Month Limited Warranty
support: Lifetime Technical support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@govee official
@govee.ofcal
@Goveeofferal
@Govee.smarthome

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 0f the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the  equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.

  2. Increase the separation between the equipment and

  3. receiver.
    Connect the equipment into an outlet on a circuit different

  4. from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
a distance entre l’utilisation et l’appareil ne doit pas ~tre nf~rieure ~ 20 cm.
Non-replaceable light source.
Not intended for illumination. Only used for creating ambiance.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The Bluetooth° word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.
Govee is a trademark of Shenzhen lntellirocks Tech Co., Ltd.  Copyright 02021 Shenzhen lntellirocks Tech Co., Ltd. All Rights Reserved.

Model: H6121
RGB LED Strip Lights

Govee H6121 RGB LED Strip Lights - qr code

Govee Home App
For FAQs and more information, please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals