Aqara HE1G01 Hub E1 Smart Home Gateway User Manual
- June 6, 2024
- Aqara
Table of Contents
Aqara HE1G01 Hub E1 Smart Home Gateway
Product Introduction
Hub E1 is a new hub launched by Aqara, which is USB-powered and supports Zigbee 3.0 protocol. With small size and flexible installation, it can be installed and applied on sockets and electrical appliances with USB port in the home, and work with a variety of accessories, which can be used as Wi-Fi repeater for data forwarding.
Quick Setup
Connect to the Aqara Home app
Download the App
Scan the following QR code or search for “Aqara Home” in the App store to
download and install the Aqara Home app.
Set the hub
Plug the hub into a USB port that can provide power, wait for the yellow
indicator to flash quickly, and make sure your mobile phone is connected to a
Wi-Fi network in the 2.4 GHz frequency band.
- Please keep the mobile phone as close to the hub as possible, and make sure that the mobile phone and the hub are using the same Wi-Fi network Open the Aqara Home app, click “+” in the upper right corner of the home page, select “Hub E1”, and follow the instructions of the app to operate.
- Connect to HomeKit: Please scan or manually input the HomeKit on the hub nameplate to set the code according to the prompts of the Apple “Home” app, and then follow the prompts to operate. Please properly protect the HomeKit on the nameplate to set the code. Once added successfully, the added hub can be viewed in the Apple “Home” app.
- If the addition fails, please long press the hub button for 10s to reset the network, and then add it again in the app. Please log in the following website to ask for help: www.aqara.com/support.
Usage
Add accessory: After the hub is added successfully, please refer to the manual
of the accessory for adding.
When an accessory is successfully added, the accessory that is HomeKit
compatible will automatically sync to HomeKit, which can be viewed on the
Apple “Home” app.
This product can be used as a Wi-Fi repeater device with an open network
hotspot. Please turn on the repeater function in the app. It allows to modify
the default SSID and password, supports a maximum of 4Mbps data forwarding
capacity, andcan access two Wi-Fi devices at most, which is recommended to
connect with only one subordinate Aqara product (such as camera and hub).
Installation Description
Hub E1 is a new hub launched by Aqara, which is USB-powered and supports
Zigbee 3.0 protocol. With small size and flexible installation, it can be
installed and applied on sockets and electrical appliances with USB port in
the home, and work with a variety of accessories, which can be used as Wi-Fi
repeater for data forwarding.
In order to ensure the stable communication between the hub and each
accessory, the hub is recommended to be installed in the center of the area
where the accessory is located.
If there is no shelter in the room, the communication distance between the hub
and the accessory can be up to 30 meters.
Indicator Description
| Indicator status | Device status |
|---|---|
| The yellow indicator is always on | The device is turning on |
| The yellow indicator flashes quickly | Waiting to connect to the network |
| The blue indicator flashes quickly | Connecting to the network |
| The blue indicator flashes slowly | Connected to the network successfully and |
the account is being bound
The blue indicator is always on| Working properly
The white indicator is always on| No network is connected in 10 minutes after
starting
The purple indicator flashes| Accessories are allowed to be added
The yellow indicator flashes slowly| Upgrading the firmware
Off| The indicator is turned off/the device is not powered on
Specifications
Product Model: HE1-G01
Input Voltage: 5V 0.5A
Operating Temperature: -10℃~40℃ (14°F~104°F)
Product Dimensions: 108×30×8 mm (4.25×1.18×0.31 in.) Wireless Protocol:
Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee 3.0 Operating Humidity: 0~95% RH, no
condensation
Notice
Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the
HomeKit- enabled Hub E1 is secured by HomeKit technology.
Use of the Works with Apple badge means that an accessory has been designed to
work specifically with the technology identified in the badge and has been
certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and
regulatory standards .
Warnings
- This product is NOT a toy. Please keep children away from this product.
- This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
- Beware of moisture, do NOT spill water or other liquids onto the product.
- Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
- Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
- This product is only suitable for improving the convenience of your home life and reminding you about the status of your devices. It should NOT be used as security equipment for home, building, warehouse or any other places. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
Wi-Fi Operation Frequency: 2412-2472 MHz
Wi-Fi Maximum Output Power ≤ 20 dBm
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power ≤ 13 dBm
EU Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd declares that the radio equipment type
Hub E1, HE1-G01 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: https://www.aqara.com/DoC/
UK Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd declares that the radio equipment type
Hub E1, HE1-G01 is in compliance with Directive 2017 (SI 2017 No. 1206, as
amended by SI 2019 No. 696).
The full text of the UK declaration of conformity is available at the
following internet address: http://www.aqara.com/DoC/.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
FCC ID: 2AKIT-HE1G01
Federal Communications Commission (FCC) compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
IC: 22635-HE1G01
IC NOTICE TO CANADIAN USERS
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES‐003.This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>