Shenzhen Innosystem Technology MZ399 Bluetooth Audio Transmitter Instructions
- June 6, 2024
- Shenzhen Innosystem Technology
Table of Contents
Shenzhen Innosystem Technology MZ399 Bluetooth Audio Transmitter
Instructions
Instruction
-
Turn on the Bluetooth headset and set it to pairing mode
-
Insert Bluetooth adapter, press and hold the pairing button for 4 seconds, the white corresponding LED flashes, and enter pairing mode
-
The indicator light turns white and is always on. After pairing, it can be used
Note: A and B keys have the same pairing method -
You can pair a headset with a B headset and connect two Bluetooth headsets at the same time
- The middle indicator is the current working mode
- The headset that has already been paired can be used again without pairing. Just plug ,n the Bluetooth adapter.
*300g 6666mm**
MZ-399 Basic Parameters
- Product Name: Bluetooth Audio USB Transmitter
- Applicable platform: Nintendo Switch/PS4/PC
- Bluetooth version: BT5.0
- Product size: 4a•14•19mm
- Working frequency: 2.402-2.480GHZ
- Working distance: 1 Om
- Working voltage: 5V
- Working current: <20MA
- Decoding format: SBCIAPTXIAPTXLL
Package included
- 1 X Bluetooth Adapter
- 1 X TYPE-C to USB 3.0 Adapter OTG
- 1 X User Manual
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
FCC Radiation Exposure Statement
portable device statements
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
E-mail: lnnosystemtech@outlook.com
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
Portable device statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>