ProPlex FloppyDrive Digital DIN Rail Mount User Guide
- June 6, 2024
- ProPlex
Table of Contents
ProPlex FloppyDrive Digital DIN Rail
Quick Start Guide
Setup
ProPlex DIN-Rail devices use a standard Phoenix MSTB screw terminal connector in various pin configurations. Please refer to the wiring diagrams below for the correct hook-up of your ProPlex DIN Rail product.
The ProPlex FloppyDrive Digital DIN Rail must operate at 24 VDC. It can drive
a maximum of 15m of 12W per meter Firefly FloppyFlex Digital LED neon and can
control a maximum of 120 pixels of RGB.
Addressing and mode selection is done via RDM protocol.
-
Connect the DC power (24V) to the power input located in the left top corner. The connector should be wired as follows:
-
Connect the DMX signal input to the DMX input located in the right top corner of the unit. The connector should be wired as follows:
2.1 To pass DMX to another device, connect the DMX cable to the DMX Thru port located in the right top corner of the unit. The connector should be wired as follows: -
Connect the FloppyFlex Digital to the output connector of the floppy drive Digital DIN Rail.
The connectors should be wired as follows:
Connection Scheme for FloppyFlex Digital
Connection scheme for DMX Thru-Port usage
Dimensions and Connections
LED Status Information
The Power LED has two states: ON and OFF.
- ON: Unit is receiving power
- OFF: Unit is not receiving power
The DMX input activity LED has two states: OFF and BLINKING YELLOW.
- OFF: There is no active incoming DMX signal.
- BLINKING YELLOW: There is an active incoming DMX signal.
DMX values for FloppyFlex Digital output
Channel | Value | Function | Pixel numb. |
---|---|---|---|
1 | 000 k- j 255 | RED intensity 0% -100% | 1 |
2 | 000 k- j 255 | GREEN intensity 0% – 100% | 1 |
3 | 000 Ei. 255 | BLUE intensity 0% – 100% | 1 |
4 | 000 k- j 255 | RED intensity 0% -100% | 2 |
5 | 000 k- j 255 | GREEN intensity 0% -100% | 2 |
6 | 000 k- j 255 | BLUE intensity 0% – 100% | 2 |
… | … | … | … |
… | … | … | … |
… | … | … | … |
358 | 000 L-j. 255 | RED intensity 0% -100% | 120 |
359 | 000 k- j 255 | GREEN intensity 0% -100% | 120 |
360 | 000 k- j 255 | BLUE intensity 0% – 100% | 120 |
CONTACT INFORMATION
LOS ANGELES HEADQUARTERS
527 Park Avenue | San Fernando, CA 91340, USA
Tel: +1 818.899.8818 | Fax: +1 818.899.8813
sales@tmb.com
TMB 24/7 TECH SUPPORT
US/Canada: +1.818.794.1286
Toll Free: 1.877.862.3833 (1.877.TMB.DUDE)
UK: +44 (0)20.8574.9739
Toll Free: 0800.652.5418
techsupport@tmb.com
LOS ANGELES +1 818.899.8818
LONDON +44 (0)20.8574.9700
NEW YORK +1 201.896.8600
BEIJING +86 10.8492.1587
CANADA +1 519.538.0888
A full-service company providing technical support, customer service, and
follow-up.
Providing products and services for the industrial, entertainment,
installation, defense, broadcast, research, telecommunications, and signage
industries.
Servicing the global market from offices in Los Angeles, London, New York,
Toronto, and Beijing.
ProPlex FloppyDrive Digital DIN Quick Start Guide, v1.2 14 June 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>