LUXLI TSB-110 2×1 Grid Softbox User Manual
- June 3, 2024
- LUXLi
Table of Contents
LUXLI TSB-110 2×1 Grid Softbox
Precautions
- Please read and follow these instructions, and keep this manual in a safe place.
- Keep this product away from water and flammable gases or liquids.
- Do not attempt to disassemble or repair this product.
- Clean this product with only a soft, dry cloth.
- To avoid damage to this product, be careful not to overtighten or improperly thread any of the threaded fittings.
- All images are for illustrative purposes only.
One-Year Limited Warranty
This LUXLI product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product
has been discontinued, the warranty provider reserves the right to replace it
with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
Thank you for choosing Luxli.
This Luxli Softbox allows you to alter the light output of the Luxli Taiko 2×1
LED Light. Quickly wrap the softbox over the Taiko’s edges, and secure
using touch-fastener straps. Mounting the included diffuser is simple and
helps soften the light, leaving you with a warmer wraparound effect and
minimized shadows. The softbox accepts the TSBG-120 Softbox Grid (not
included) to add directionality, focusing the light in a more controlled beam
Contents
- Softbox
- Diffuser
- Carrying case
- User manual
40° Softbox Grid for Taiko 2×1 (TSBG-120) – Sold separately
To obtain warranty coverage, contact the Luxli Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Luxli along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service,
- visit www.luxlilight.com or
- call Customer Service at 212-594-2353.
- Product warranty provided by the Gradus Group.
- www.gradusgroup.com
LUXLI is a registered trademark of the Gradus Group.
© 2022 Gradus Group LLC. All Rights Reserved.
Overview
Folding the Softbox
- Hold the softbox by the sides and move them in opposite directions, as pictured. The softbox will fold flat.
- Lay the softbox down on a flat surface, and slowly fold the two outer corners together, as pictured. Feeling some resistance is normal.
Exert a little pressure, which will allow the softbox to fold down flat and fit into the carry bag.
Specifications
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>