ROBITRONIC SK100070 eN3 NiMH/NiCd Charger Instructions
- June 6, 2024
- Robitronic
Table of Contents
ROBITRONIC SK100070 eN3 NiMH/NiCd Charger
SKYRC eN3 NiMH/NiCd Charger is an economic, high-quality 100-240V AC charger, designed for charging NiMH and NiCad batteries from 4-8 cells. The circuit power is 20W and max charge current can reach to 3A. There are four kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity.
There is one LED indicating the charger status (ready to charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working.
Illustration
Technical Data
- Input Voltage
- Controls
- Indication
- Case Material
- Maximum Cells
- Charge Current
- Charge Wattage
- Weight
- Dimensions (LxWxH)
- AC Input: 100-240V, 50-60 Hz 1 Switch
- 1 LED for Charging Status
- Plastic
- NiMH/NiCd: 4-8 cells
- 1A, 2A, 3A
- 20W
- 175g
- 69.5x110x40.5mm