TandG TG-264 Portable Bluetooth Speaker User Manual
- June 1, 2024
- TandG
Table of Contents
TandG TG-264 Portable Bluetooth Speaker
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
Product Usage Instructions
Compliance with FCC Rules:
Ensure that the device is used by Part 15 of the FCC Rules to prevent
harmful interference.
Avoiding Interference:
Place the device in a location that minimizes the potential for
interference from other electronic devices.
Modifications:
Do not make any changes or modifications to the device that are not
approved by the responsible party to maintain compliance.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the device is causing interference?
A: If the device is causing interference, try relocating it to a different area away from other electronic devices. -
Q: Can I modify the device for better performance?
A: No, any modifications not approved may lead to non-compliance with FCC Rules and void your authority to operate the equipment.
PRODUCT SPECIFICATIONS
- Wireless: V5.3
- Support: L2CAP/A2DP/AVCTP, can receive AUDIO signal and control the AUDIO device.
- Support HSP//HFP (Handsfree profile), with HANDS-FREE functions.
- Working distance:<1 OM
- Working distance:10M
- SNR:?90db
- Battery: 3.7V 1200mAh
- Normal volume playing time:5H
- Speaker driver: ¢52mm*1
- Speaker Power: 4O/SW * 1
- Frequency response: 120Hz -20KHz
- Unit si ze: 8585142mm
- Unit weight: 380g
- Charging:5V/500mA
- Charging time:3-4H
PRODUCT FEATURE
- international advanced wireless chip and circuit design techniques, support wireless devices.
- With the FM function, one can search radio station broadcasts automatically
- With a Hi-Fi speaker, to make sure a clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- lt will close automatically after 30 mins if disconnected Wireless.
- With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones. a.Support TWS.
KEY AND SLOT FUNCTION
-
DC 5V slot: Use the standard Micro USB VB charging cable for power charging. The red light is on during charging, and the red light is off after charging.
-
TF slot: It can decode and play MP3 format audio when put TF card into the slot.
-
USB slot: It can decode and play MP3 format audio when put the USB card into the slot.
-
AUX line in slot: Use the Mini 3.5 head input through outside devices.
-
Power switch: Press long for power on /power off.
When playing music, (USB card/TF card/Wireless), short press for “play/pause”. In FM mode, press short to search station automatically, and press again to stop searching. Under wireless mode with mobile paired.when a call comes. press short to answer a call hands-free, and press again to hand up. press twice to ring up a call. -
When playing music, Press short for the last song, and long press to turn down the volume.
-
When playing music, press short for the next song, and long press to turn up the volume.
-
Short press to switch model (USB card/TF card/Wireless/ FM).
Keep the two speakers under wireless mode without pairing, press the “M” key for 2-3 seconds on either of the speakers until hear a hint and meantime the button light stop flashing, now it is TWS mode, then can paire the mobile.
NOTE: In the FM mode, put in the AUX cable to increase the radio signal.
The RESET button is built in the LINE IN hole scan press the button to reset the speaker.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.