BYTECC HM-SP102K 1×2 HDMI 2.0 4K 60HZ Splitter Installation Guide
- June 13, 2024
- BYTECC
Table of Contents
BYTECC HM-SP102K 1×2 HDMI 2.0 4K 60HZ Splitter
Product Information
The 1×2 HDMI 2.0 4K@60HZ/HDCP 2.2 Splitter is a high-performance HDMI splitter that allows you to connect one HDMI source to two HDMI outputs. It supports 4K2K resolution, Full 3D, 12-bit Deep Color, and High Definition Lossless Audio. With its 18Gbps bandwidth and compliance with the latest HDMI standards, it ensures excellent HDMI distribution.
Applications:
- Simultaneously display one HDMI source on two TVs/projectors
- Showroom display
- University lecture hall display
- Retail sales display
- Commercial presentation switcher/scaler
Features:
- Integrated HDCP decryption/encryption engines compliant with HDCP Rev 1.4/2.2 specification
- Wide Frequency Range: 25MHz – 600MHz
- Supports HDTV resolutions up to 4K 60Hz
- Supports 4K@60Hz, Deep Color 12-bit
- Supports LPCM 7.1CH and DTS-HD Master Audio
- Supports Full 3D
Package Contents:
- 1x 1×2 HDMI 2.0 4K@60HZ/HDCP 2.2 Splitter
- 1x 5V/1A DC Power Supply Adaptor
- 1x User Manual
System Requirements:
To use this splitter, you will need:
- HDMI-equipped source devices such as a DVD/Blu-ray player with HDMI cables or DVI to HDMI cables
- HDMI-equipped displays (TVs or monitors) with HDMI cables
Product Usage Instructions
- Connect the HDMI cable from the HD source (e.g., DVD/Blu-ray player) to the input port of the HDMI Splitter.
- Connect the HDMI cables from your displays (TVs or projectors) to the output ports of the HDMI Splitter.
- Plug the 5VDC power supply into the HDMI Splitter.
- Turn on the power, and the HDTV signal will be distributed to each HDTV display.
Specifications:
- Video Bandwidth: 600MHz/6Gbps per channel, 18Gbps all channels
- Input Port: 1
- Output Ports: 2
- Output Resolution: 480i~1080p@50/60, 1080p@24/50/60, VGA~UXGA, 4K 2K@60Hz
- Chassis Material: N/A
- Operating Temperature: N/A
- Storage Temperature: N/A
- Relative Humidity: N/A
Note:
When displaying a 3D signal with a higher bandwidth than 225MHz or a 4K2K
resolution source, a High-Speed HDMI cable is required.
SYSTEM REQUIREMENTS
- HDMI-equipped source devices such as a DVD/Blu-ray play with HDMI cables or DVI to HDMI cables
- HDMI-equipped displays (TVs or monitors) with HDMI cables
PANEL DESCRIPTIONS
- HDMI OUTPUT: Connect each of the output ports to the HDMI display for simultaneous HDMI distribution.
- LINK LEDs: These LEDs will illuminate when the HDMI outputs are connected to the display with the signal display on the screen.
- HDMI INPUT: Connect the input port to the HDMI or DVI output of your source equipment such as a DVD player or set-top box.
- INPUT LED: The input LED will illuminate when connected to a HDMI source.
- POWER LED: The power LED will illuminate when the unit is powered.
- 5 V/DC: Connect the 5 V/DC power supply to the splitter and Plug the adaptor into the AC wall outlet.
INTRODUCTION
This high-performance HDMI2.0 splitter provides one HDMI into two HDMI outputs and supports 4K2K, Full 3D, 12-bit Deep Color as well as High Definition Lossless Audio. With its 18Gbps bandwidth and the additional features of the latest HDMI standards, you can be sure of great HDMI distribution.
APPLICATIONS
- Simultaneously display one HDMI source on two TVs/projectors
- Showroom display
- University lecture hall display
- Retail sales display
- Commercial presentation switcher/scaler
FEATURES
- Integrated HDCP decryption/encryption engines which are compliant with HDCP Rev 1.4/2.2 specification
- Wide Frequency Range: 25MHz – 600MHz
- Supports HDTV resolutions up to 4K 60Hz
- Supports 4K@60Hz, Deep Color 12-bit
- Supports LPCM 7.1CH, and DTS-HD Master Audio
- Supports Full 3D
PACKAGE CONTENTS
- 1x 1×2 HDMI 2.0 4K@60HZ/HDCP 2.2 Splitter
- 1x 5 V/1A DC Power Supply Adaptor
- 1x User Manual
CONNECTION DIAGRAM
OPERATION
- Connect the HDMI cable from the HD source to the input port of this HDMI Splitter.
- Connect the HDMI cables from your displays (monitor or projector) to the outputs of this Splitter.
- Plug the 5VDC power supply into this HDMI Splitter.
- Turn on the power then the HDTV signal will be distributed to each HDTV display.
SPECIFICATIONS
Video Bandwidth| 600MHz/6Gbps per channel,
18Gbps all channel
---|---
Input Port:| 1×HDMI (Female connector)
Output Ports:| 2×HDMI (Female connector)
Output Resolution
| 480i~1080p@50/60,
1080p@24/50/60, VGA~UXGA, 4K 2K@60Hz
Chassis Material| Metal
Operating Temperature| 0 °C~40 °C/32 °F~104 °F
Storage Temperature| −20 °C~60 °C/−4 °F~140 °F
Relative Humidity| 20~90% RH (non-condensing)
Note:
When displaying a 3D signal with a higher bandwidth than 225MHz or a 4K2K
resolution source, a High-Speed HDMI cable is required.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>