DELTON 10X Wireless Headset With Noise Canceling Microphone User Manual

10X
WIRELESS
HEADSET
WITH NOISE
CANCELING
MICROPHONE

USER MANUAL

Thank you for purchasing the
Delton 10X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep it for future reference. This manual explains the features and functions of this product.

PRODUCT DESCRIPTION

PAIRING TO ONE DEVICE

NOTE: Make sure the headset is turned off.

1. Press and hold the multifunction button for 5-6 seconds until you hear a voice prompt “pairing” and the indicator light alternates between blue and red. This indicates that the headset is in pairing mode.

2. Navigate to the Bluetooth screen on your device and make sure Bluetooth is turned on.

3. On your device’s Bluetooth screen, find the DELTON1OX from the list of devices available to connect with.
   NOTE: If asked for a pin, enter “0000”.
   NOTE: If your device does not automatically pair, select the DELTON1OX from your list of Available Devices to pair.

4. You will hear a voice prompt “your device is connected” and it will flash blue to indicate it has completed pairing.

PAIRING TO TWO DEVICES

NOTE: This headset contains a dual-link function for connecting with two Bluetooth-enabled devices simultaneously.

1. Pair the first device following the steps above.
2. Temporarily turn off the first connected device’s Bluetooth.
3. Pair the second device using the steps above.
4. Turn off the DELTON10X headset.
5. Turn on the first device’s Bluetooth.
6. Turn on the DELTON10X headset. The headset will re-connect to both devices automatically.

GENERAL FUNCTIONS

Turning On:
Press and hold MFB for 5 seconds
Turning Off:
Press and hold MFB for 5 seconds
Pair/Clear Pair
When a device is off, press and hold MFB for 5-7 seconds until LED flashes Blue/Red
Volume Control
Press V+ or V-
Switch Audio Output
Press and hold V+ until you hear a tone(2-3 seconds)

Call Functions

Audio Functions

LED INDICATOR

Mode Indicator

CHARGING THE HEADSET

NOTE: It is highly recommended that you fully charge the headset overnight (8-10 hours) before first-time use, or if the headset has not been used for more than 21 days.

1. Plug the Micro end of the cable into the charging port of the headset.
2. Plug the Type A end of the cable into a computer or laptop’s USB port, or a USB Type A charging block (not included).
3. Do not use the headset while charging.

SPECIFICATIONS

Windows

Stand By:| Up to 220 Hours
Talk Time:| Up to 18 Hours
Play Time:| Up to 16 Hours
Charging Time:| 2 Hours

WHAT’S IN THE BOX? Troubleshooting

• Ensure that the Bluetooth function on the device is enabled.
• Ensure that DELTON10X is shown as connected and paired with your device.
• Ensure that the default audio input/output on your device is set to the DELTON10X.
• Ensure the range between the headset and the paired device is less than 30 feet (9 meters), and that there are no disturbances or electrical devices between the headset and the paired device.
• Check if the indicator light signals low battery and recharge as needed.
• Disable your pop-up blocker. If using a browser-based service like Google Meet or Slack browser app, pop-up blockers can prevent the browser’s microphone permission request from displaying.

HEADSET STORAGE AND CARE

• Only use originally included accessories with this device.
• Use a clean, soft, static-free cloth to clean headset surfaces.
• Store headset away from dust, heat, and water.
• Do not store headsets or chargers in extreme environments.
• Do not allow children to use headsets unsupervised.

This device complies with Part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following:

• Reorient or relocate the receiving antenna
• Increase separation between equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

WARRANTY

Delton warrants this product against defects in material and/or workmanship under normal use. To view our warranty policy or to submit a claim, please visit overtimebrands.com/pages/warranty-information.

LEGAL WARRANTY

The period of guarantee and any other conditions relating to it, is governed by the legislation of the country where the product was purchased.

1YEAR
WARRANTY

Register your product at
overtimebrands.com

Documents / Resources

| DELTON 10X Wireless Headset With Noise Canceling Microphone [pdf] User Manual
10X Wireless Headset With Noise Canceling Microphone, 10X, Wireless Headset With Noise Canceling Microphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>