DELTON 50X Sox Wireless Headset User Manual
- June 16, 2024
- DELTON
Table of Contents
DELTON 50X Sox Wireless Headset
THANK YOU
THANK YOU FDR PURCHASING THE DELTON 50X WIRELESS HEADSET
Please take a moment to read this user manual thoroughly, and keep it for future reference. This manual explains the features and functions of this product.
SPECIFICATIONS
- Driver: 32Ω
- Impedance: 300Ω
- Noise Canceling: DSP ENC Wireless: vs.o
- Play Time: Up to 30 Hours Operation Range: 30 Ft
- Charging Time: Up to 2 Hours
- Battery: 350mAh Li-polymer
- Stand-by Time: Up to 110 Hours
- Charging Interface: Type-C
Dimension
- Headset: 191.20138.2861.60mm
- Charging Dock: 7074.9179.64
WHAT’S IN THE BOX
- Wireless Headset
- Charging Dock
- Type-C Charging Cable
- User Manual
PRODUCT DESCRIPTION
PAIRING
PAIRING TO ONE DEVICE
- While headset is off, press and hold “MFB” for 4-6 seconds to enter pairing mode. The LED will alternate flashing blue and red.
- In your phone’s or your PC’s BT pairing screen, click DELTON50X to connect to the headset. The LED will slow flash blue when the headset is connected.
PAIRING TO TWO DEVICES
-
Follow BT PAIRING INSTRUCTIONS with first phone or PC then turn off BT function of first phone or PC. The headset will enter pairing mode automatically and LED will alternate flashing blue and red.
-
Turn on the BT function of second phone or PC to search and connect to DELTON50X. The LED will slow flash blue when the headset is connected.
-
Turn on BT function of first phone or PC, click to reconnect “DELTON50X”on BT lists. Headset is connected with two devices now.
-
Music can only be played from one device under two connections, when you want to play music from another device, you need to pause vor close the music of the previous device.
GENERAL FUNCTIONS
- Power
- Turning On: Press and hold “MFB” for 2-3 seconds
- Turning Off: Press and hold “MFB” for 2-3 seconds
- Wireless Connectivity
- Clear Pairing: When headset is ON, hold down the “MFB” and “Volume+” button for 5 seconds.
- Playback
- Play/Pause: Press “MFB”
- Previous Track: Long press “Volume.”
- Next Track: Long press “Volume+”
- Volume Control
- Raise Volume: Press “Volume+”
- Lower Volume: Press “Volume.”
CALL FUNCTIONS
- Answer Call: Short press “MFB” to answer an incoming call
- End Call: Short press “MFB” to hang up the call
- Reject Call: Long press “MFB” for 1 second to reject incoming calls
- Mute Mic: Short press the Microphone Mute Button
- Mic On (Unmute): Short press the Microphone Mute Button
- Redial Last Number: Double click “MFB” to redial the last dialed phone number (when phone is in standby or playback mode).
- Three-Party Call: Double click “MFB” to hold the current call and connect to the new call. Double click “MFB” again to switch between the reserved call and the current call (short pressing will end the call)
POWER SAVING FUNCTIONS
- Automatic Shutdown
- Automatically shuts down when there is no connection for more than 10 minutes.
LED INDICATOR
Mode / Indicator
PowerON | Blue LED flash 2 times |
---|---|
Power OFF | Red LED flash 2 times |
Pairing Mode | Blue and Red LED flashing alternately |
Clear Record | Blue and RED LED flash 1 time |
Connected Standby Mode | Blue LED flash every 10 seconds |
Plavinq Music | Blue LED flash every 10 seconds |
Dialingffalking | Blue LED flash every 10 seconds |
LowBattery | Red LED flash |
Charging | Red LED is steady on |
Full Charged | Red LED will turn off |
Mic Mute | Red LED flashes 1 time every 6 seconds |
INSTRUCTIONS FOR THE DOCK
- Set up: Plug the included USB cable into any USB outlet, adapter, or even PC/laptop. Plug the USB-C end of the cable into the charging dock.
NOTE: LED indicator is on the dock, not on the headset.
CHARGING
Please charge the DELTON50X when you see the red LED flash. Charging time is about 2 hours. The solid red LED will turn off when the headset is fully charged. Two ways to charge the DELTON50X:
- Charge On Dock
- Use the included USB-C cable and connect the docking station into either a USB outlet/adapter or to a computer. Rest headset on the dock for it to charge.
- Charge Headset Directly
- Use the included USB-C cable and connect it to either a USB outlet/adapter or to a computer. Plug the Type-C end of the cable into the headset.
WARRANTY
- Delton warrants this product against defects in material and/or workmanship under normal use.
- To view our warranty policy or to submit a claim, please visit overtimebrands.com/pages/warranty-information.
LEGAL WARRANTY
- The period of guarantee and any other conditions relating to it, is governed by the legislation of the country where the product was purchased
- 1 WEAR WARRANTY
Register your product at overtimebrands.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>