TROTEC T660 Capacitive Humidity Meter User Guide
- June 6, 2024
- TROTEC
Table of Contents
TROTEC T660 Capacitive Humidity Meter
HOW CAN USE
-
Turn on the unit on the power button on the right hand side hold the unit in the air while hand is down the bottom of the unit far away from the steel ball.
-
Touch the keypad to light up the screen
-
Hold the menu button down till the menu appears this left arrow button (west)
-
Press the down arrow (south) till the MAT is flashing on the screen
-
Press the tick button
-
The number “0” will be flashing
-
Press the up arrow (north) twice the 2 CE will appear
-
Hold the Tick button
-
It will now show 2 values:
0.0
0.0 -
The Top number 0.0 will go to 7.6 that’s volume mass for con-crete and should read under 3.4 if you press the up arrow (north) the CM will appear this is a Calcium Carbide Equivalent
-
This is going down 40 mm and should read under 2.0 which is an equivalent to 75% relative humidity
-
The Bottom number goes to 200 digits this is a relative scale for all other building materials
-
Using the left hand arrow (west) you can scroll between:
Actual reading,
Minimum reading,
Maximum reading,
Average reading
and hold to take screen readings (on the hold button to change to take a new screen readings press the tick button)