OYPLA 3825 Fan Heater User Manual

June 6, 2024
Oypla

OYPLA logo

OYPLA 3825 Fan Heater

Safety Instructions

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services.

  • The product should only be connected to a 220-240V AC, 50Hz electrical outlet.
  • Never leave the product unattended whilst it is switched on.
  • If you have to leave the product unattended, even for a short while, always switch it off.
  • Keep the product out of children’s reach and do not allow children to use it.
  • The product is only intended for normal domestic use and only in the manner described in this instruction manual.
  • Inspect the mains lead regularly. Never use the product if the mains lead or plug has been damaged in any way.
  • Do not place the mains lead on or near any hot surface.
  • Do not touch the product if your hands are moist or wet.
  • Never move the product by pulling on the lead.
  • Keep furniture, curtains and other flammable material at least 1 metre away from the heater.
  • Keep the air inlet and outlet away from objects at least 1m in front of the heater and 50cm behind.
  • Do not use this heater in bathrooms.
  • Never place the cable directly against the heater or close to a hot air outlet.
  • Do not touch the heater during use as it will get very hot and could cause injury.
  • The heater must not be located immediately below or next to a mains power supply.
  • Never cover the heater in any way.
  • Do not move the heater whilst in use.
  • Never use the heater in areas where explosive gasses or liquids are stored.
  • The heater should be placed on a stable, heat-resistant surface.
  • This product is not intended for use by persons (including children) with reduces physical, mental and sensory capacities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of the product by persons responsible for their safety.
  • Do no discard of any packaging until you have checked that you have all of the parts and fittings required.
  • If the product is damaged or has any defects, please contact cservice@oypla.com

Operating Instructions

Operating Instructions

  1. Plug the heater into a 220-240V AC outlet. The heater will be on standby mode.
  2. Turn the thermostat knob clockwise to the maximum setting.
  3. For a low heat setting, turn the control knob to the “I” position (1000W). For a high heat setting, turn the control knob to the “II” position (2000W)
  4. The heater can also be used as solely a fan in hot weather by turning the control knob to the position.
  5. To turn off the heater, turn the control knob to the “O” position.

Regulating the Thermostat

Once the room has reached the desired temperature, turn the thermostat knob anti-clockwise to the point where the heater turns off and not beyond. The heater will now maintain the current room temperature and will automatically turn on if the temperature drops.

Overheat Protection

The heater has been provided with an overheating safety sensor that turns the heater off if there is a technical malfunction or if it is being used incorrectly (such as obstruction of the air vents). If it happens, you must unplug the heater and remove the cause of overheating or correct the malfunction.
After a cooling down period of approximately 15 minutes turn the heater back on.

Care and Maintenance
  • Before cleaning the heater, disconnect the plug from the power supply and allow it to cool down fully.
  • Clean the casing with a damp cloth. Do not use any strong cleaning material and do not allow water to reach any internal parts.
  • If the heater is not going to be used for a long time it is recommended to store the heater in its box in a dry place to prevent the build-up of internal dust.

Environmental Protection

Products bearing the symbol shown below means that used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.OYPLA 3825 Fan Heater
fig1

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals