KRUX Leda KRX0007 Computer Case Installation Guide

KRUX Leda KRX0007 Computer Case

ACCESSORY PACKET CONTENTS

REMOVAL OF PANELS

CASE FEATURES

• A – SIDE TEMPERED GLASS PANEL
• B – FRONT TEMPERED GLASS PANEL
• C – SIDE PANEL
• D – POWER+ RESET BUTTON
• E – lx USB 3.0, 2x USB 2.0, HD AUDIO
• F – DUST FILTERS

ADD-ON CARD INSTALLATION

1. BEND ADD-ON CARD COVER
2. SLIDE PCI-E CARD INTO POSITION
3. SECURE PCI-E CARD WITH ADD-ON SCREW

POWER SUPPLY INSTALLATION

3,5′ HDD INSTALLATION

1. REMOVE FRONT FAN BY UNSCREVING THE FAN SCREWS
2. SLIDE 3,5  DRIVE INTO THE BAY
3. SECURE WITH SCREWS ON BOTH SIDES

2,5′ 550 INSTALLATION

1. PLACE 2,5 DRIVE IN
2. SECURE WITH SCREWS

FRONT/REAR FAN INSTALLATION

TOP FAN INSTALLATION

WATER COOLING INSTALLATION

MULTIPLE FANS

2-year manufacturer warranty

Use and warranty limitations

• The product should be used according to its intended purpose. Incorrect use can damage the product and endanger the life of the user.
• Excessive humidity, dust and other contaminations can result in product damage which is not covered by the warranty.
• The warranty does not cover mechanical damage to the product.
• Avoid exposure to rapid changes in ambient temperature. Should they occur, wait approx. 30 minutes before using the product until the temperature is leveled.
• You can find the Warranty Terms and Conditions in “Support” at https://krux.tech/

ENTITY RESPONSIBLE:
COOLING SP. Z O.O. UL. SOKOLOWSKA 24 05-806 SOKOLOW, POLSKA
TEL. +48 22 292 01 30
BDO: 000020025

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>