COSTWAY OP70072 Snow Racer User Manual
- June 6, 2024
- COSTWAY
Table of Contents
USER’S MANUAL
Snow Racer
OP70072
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assemble Diagram
- Please install the ski board on the left and right bottom of the frame. (step 1)
- Please tight the screw connected with ski board to frame. (step 2)
- Use 4 screws to fix the plastic seating panel to the frame. (step 3)
- Insert the steering shaft into steering hole. (step 4)
- Fix the steering cover to the steering shaft. (step 4)
- Connect front ski board with the steering shaft through steering cover. (step 4)
- Tighten the screw on the front ski board, steering cover and also those on the Steering shaft. (step 4)
- Connect the wheel and the steering shaft. (step 5)
- Tighten the screw that connected the wheel and steering shaft. (step 5)
User manual of snow racer
Thanks for choosing our snow racer. For the maximum utility of the Product and the great pleasure acquired from playing with the product, Please take some time to read through this manual before using it. You are supposed to follow the instruction without missing points.
Installation
Please prepare following tools for the installation of the snow racer: hexagon
wrench, and cross screw driver. please install the snow racer according to the
consequence of the illustration.
Tips for the driving
Please take seat on the plastic seating panel; grasp the steering wheel; let
your feet relaxed on the ski board; keep your sight looking straight; turn the
wheel to your desire direction. When decelerate needed, please trample on the
brake steps slightly and surely grasp the wheel. The simple and effective
brake system will systemic give deceleration according to the strength you
trample on the brake.
Max Load
The maximum load of the racer is 75 kg!!
Applicability
Only can be used on the surface covered with snow of the thickness more than
30mm!!
Warning and Safety Instruction
This product is special design for the age elder than 4 years. It is prohibit
that the user is below 48-month!!Children must be under the guidance of the
adult in using it. Please ride it with helmet and gloves. Please do not ride
in bad weather and load exceeds the limitation as specified. Riding on the
slope with the grade bigger than 35 degree is prohibit..
Installation
Step1. plsase install the ski board on the left and right bottom of the
frame.(1)
Step 2: please tight the screw connected with ski board to frame.(2) The
screw hole For fixing board
Step3: Use 4screws to fix the plastic seating panel to the frame.(3)
Step 4: Fix the front ski board on the steering shaft and make sure the
Step 5: Firstly insert the steering shaft into the steering hole on
theframe. Then put the shaft cover on the steering shaft. Finally insert the
wheel into shaft.(8.9)
Step 6: Try to trample the brake
Step7: Hook the spring on this position connected with frame
Step 8: Fix the string on the front ski board
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>