Winsen ZP07-MP503 Air-Quality Detection Module User Manual
- June 4, 2024
- Winsen
Table of Contents
Winsen ZP07-MP503 Air-Quality Detection Module
Statement
This manual’s copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without written permission, any part of this manual shall not be copied, translated, or stored in a database or retrieval system, also can’t be spread through electronic, copying, or record ways. Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, or change the components inside of the sensor, we shall not be responsible for the loss. The specific such as color, appearance, sizes &, etc., please in kind prevail. We are devoting ourselves to product development and technical innovation, so we reserve the right to improve the products without notice. Please confirm it is the valid version before using this manual. At the same time, users’ comments on the optimized using way are welcome. Please keep the manual properly, in order to get help if you have questions during the usage in the future.
Zhengzhou Winsen Electronics Technology CO., LTD.
ZP07 Air-Quality Detection Module
Product Description
ZP07 air-quality module adopts flat surface semiconductor gas sensor. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol, and smoke of cigarette, essence &, etc. The module has a good consistency and high sensitivity after aging, debugged, adjusted, and calibrated
Features
High sensitivity, excellent long-term stability Low power consumption, long life Calibrated before shipment 10 seconds to 3 minutes with auto-preheating function Faulty auto-check, High cost-effective
Application
Air cleaner, fresh-air system, intelligent integrated ceiling, air quality
detector, ventilator, air-condition
Picture 1:Module structure diagram(Dimension tolerance ±0.2mm)
Sensitivity Characteristics
Application of schematic diagram
Cautions
- Please do not put the module in organic solvent (including silica gel and another cementing compound), painting, medicament, oils and fuels, high concentration gas etc.
- Please do not impact or vibrate the module seriously.
- Please warm up for 5 min before first use.
- Please do not use the module related to personal safety.
- Please do not install the module in a severe convection environment.
- Please do not put the module in high concentration organic gas for a long time.
- Please power the module strictly according to the power supply voltage of the module. If the
voltage exceeds 5.5V, the module will be irreversibly damaged.
References
- Winsen Gas Sensor_CO2 Sensor_Air Quality Sensor_Dust Sensor_CO Sensor-Winsen Electronics
- Winsen Gas Sensor_CO2 Sensor_Air Quality Sensor_Dust Sensor_CO Sensor-Winsen Electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>