PHILIPS SPK7407 2.4GHz+BT3.0+BT5.0 Wireless Mouse User Manual
- October 27, 2023
- Philips
Table of Contents
Mouse
4000 Series
SPK7407
User manual
Function overview of the mouse
1. Scroll wheel
2. Left and right buttons
3. Wireless receiver
4. Bluetooth mode 2 indicator
5. Bluetooth mode 1 indicator| 6. 2.4G wireless mode indicator
7. Mode switch button
8. Optical sensor
9. ON/OFF switch
10. Battery door
---|---
2.4G wireless connection guide
1. Push the battery door away.| 2. Pull off the battery insulating film.
Turn on the power switch.
---|---
|
3. Take out the receiver and close the battery door.| 4. Plug the receiver
into the USB port of a PC.
|
Note: the factory default setting of the connection mode of mouse is 2.4G mode. If the connection is successful, the 2.4G mode indicator will automatically turn off.
Mouse Bluetooth connection guide
Note: make sure that the mouse power is on before Bluetooth pairing.
1. Short press the mode switch button to select the Bluetooth mode to be
connected, and the corresponding indicator light on the top will flash slowly;
long press the Bluetooth mode switch key, and the corresponding indicator
light on the top will flash quickly, then enter the waiting for Bluetooth
pairing.
2. Turn on the Bluetooth of your computer or other devices, search and select
“Philips SPK7407” or “SPK7407” and start Bluetooth pairing until the
connection is completed.
Note:
- Bluetooth 5.0 is not supported on Windows 7 and below;
- The device ID for Bluetooth 3.0 is Philips SPK7407, while for Bluetooth 5.0 is SPK7407.
Mode switching method of the mouse
- The mouse has three channels, 2.4G, Bluetooth 1 and Bluetooth 2, which can connect three devices at the same time.
- Mode switching. Short press the mode switch button, the corresponding mode indicator on the top will be on for 3 seconds, and then it will be off. The switch to the corresponding equipment is completed. If the mode indicator is flashing slowly, it means that the mode has not been connected.
Packaging contents
- Wireless mouse
- Wireless receiver
- User manual/warranty card
- 1*AA battery (inside mouse)
System requirement
- 1 x USB port
- Bluetooth 3.0/Bluetooth 5.0
- Windows® 7,Windows® 8,Windows® 10 or later, Android 3.2 and above; Mac OS 10.5 or later
Technical specifications
- Connectivity：2.4GHz/Bluetooth 3.0/Bluetooth 5.0
- Working distance: 2.4GHz about 15m/Bluetooth about 10m
- Number of buttons：4
- Button lifespan: 3 million clicks
- Resolution：1600 DPI
- Power supply: 1*AA Philips battery
- Interface: USB wireless receiver
- Mouse size ：110.2×65.6×34.8mm
- Product weight：83g ± 5g
- Operating temperature range: 0 ° C to 40 ° C
- Operating humidity range: 10% – 85%.
Trouble shooting
- Make sure that the USB wireless receiver of the product is correctly plugged into the USB port of the computer.
- Make sure the computer meets the minimum system requirement.
- If the distance between the product and the receiver exceeds an effective range, please reduce the distance for better performance.
If you can’t solve the problem, please try to find the solution from Philips website or nearest retailer. Please do not disassemble the product by force.
Attention
- Photoelectric technology can correctly detect the movement of mouse on most surfaces. Do not use the mouse on any reflective, transparent or uneven surfaces.
- Please use dry and soft cloth to clean the product.
- Do not disassemble the product by force.
- Do not direct the light from the bottom of the mouse to your eyes.
- Do not get in the rain or in the sun or fire.
- Do not flush directly with water.
Important safety and compliance information
Disposal of product and packing material
Waste Electrical and Electronic Equipment-WEEE
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling or waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resource and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact the local city office, the household
waste disposal service or the shop where you purchased the product.
CE Declaration of Conformity
This device complies with the requirements set out in the Council Directive on
the Approximation of the Laws of the Member States relating to Electromagnetic
Compatibility Directive (2014/30/EU), RoHS directive (2011/65/EU) and Radio
Equipment Directive (2014/53/EU)( for Radio Equipment )
This product has been tested and found to comply with the harmonized standards
for Information Technology Equipment, these harmonized standards published
under Directives of Official Journal of the European Union.
Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE – CAUSING EQUIPMENT REGULATIONS.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warranty Card
Dear customer,
Thank you for purchasing a Philips IT accessory product. To ensure you a
reliable after-sales service, please read the following instructions
carefully. This product warranty period is valid for one year from the date of
purchase (the date of receipt of the return receipt and the invoice date of
the buyer).
Register your product and get support at :
www.philips.com/welcome
The following situations are not covered by after-sales service :
- Unable to provide a valid warranty card and invoice (not including those that can prove the products is within the valid warranty period) or the alteration of the warranty without authorization.
- The product model and serial number on the warranty card are not in conformity with the physical product or without the distributor seal.
- The model number, serial number or production date code on the product has been altered, removed or made illegible.
- The defect is the result of excessive use outside the intended purpose, e.g. non-stop use in a commercial environment.
- Damage due to not used in accordance with product instructions.
- Damage caused by the use of pirated software or computer virus during use.
- Damage caused by accident, damage, or repair from unauthorized service vendors.
- Damage caused by force majeure.
- The product does not work properly due to missing connection caused by accident, signal interference or other influential factors during use.
- For normal wear and tear defects, or by their nature consumable parts.
- The product does not function properly because it was not originally designed, manufactured or approved for use in the country where you use the product, which might occur when you imported the product.
If the functions of the product which you had purchased are defected or can
not be used normally, please contact your local retailer or contact:
Email: India.Callcentre@tpv-tech.com
Hotline service: 1800 425 6396
Opening hours: 10 a.m. to 9 p.m. from Monday to Saturday & 10 a.m. to 6 p.m.
on Sunday.
The serial number of the product filled in the form must be consistent with
the actual product. This certificate the primary instrument for the after-
sales service, please safe keep it. If you need technical support, please show
this warranty card, and we will provide quality and professional services.
Commodity
Information| Name|
---|---|---
Place of origin|
Model No.|
Serial No.|
User info.| Name|
Address|
Tel.|
Postcode|
Sales info.| Retailer|
Address|
Tel.|
Postcode|
Stamp &
Signature|
Dear customer, the above information is to be filled in by the seller Please cooperate with us. Thank you! The following information shall be filled in by the maintenance agency and returned to the customer.
Maintenance info.| Maintenance company name|
---|---|---
Address|
Tel.|
Postcode|
Document No.|
Date|
Signature|
2022 © Top Victory Investments Limited . All rights reserved.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of
Top Victory Investments Limited , and Top Victory Investments Limited is the
warrantor in relation to this product.
Specifications are subject to change without notice
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
Made in China
Register your product and get support at:
www.philips.com/welcome