1MORE S1001BT Portable Bluetooth Speaker User Guide

S1001BT Portable Bluetooth Speaker
User Guide

Important Safety Instructions

Please read this User Guide carefully and save it for future reference.
Important safety instructions

1. Read and follow all instructions.
2. Heed all warnings.

Caution
Read and follow these precautions before using this product to ensure optimal performance and to avoid danger or illegal conditions.

1. Do not use this product in a dusty, humid or dirty place in case of internal circuit
2. Do not place the product near heat or a source of ignition such as electric heaters, microwave ovens, fires, water heaters, candles, or other places where high temperatures may occur.
3. To avoid signal interference or signal loss, please keep the product away from Bluetooth devices, Wi-Fi devices, 2.4 Gfriz computer peripherals, cordless telephones, microwave ovens, refrigerators and other electronic devices.
4. The highest service environment temperature of the product is 45 C .
5. Do not place items on top of this product.
6. Keep the product or accessories in a ventilated, cool place and away from direct
7. Do not disassemble or modify this product and its accessories without Doing so will result in the warranty being voided.
8. Do not use harsh chemicals or strong detergents to clean the product and its Wipe the product or its accessories with a clean, dry soft cloth, and unplug the power supply before cleaning
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
10. If the product has been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
11. This product is applicable to tropical climates. For this product is not attached with a power adapter, the users have to charge the product with the power adapter satisfying tropical climate when necessary.
12. The service altitude of this product is determined by the finally selected power
13. The product is inedible, please put it out of reach of children to prevent any

Unpack The Box

Product Overview

Charging

• The speaker comes charged with a certain amount of power at the factory and can be used immediately upon opening. However, it is recommended you fully charge prior to first use.
• To begin charging, please charge the speaker with the included Type-C to USB charging cable provided in the box.
• It will take 3 hours for a complete charge. The Red LED indicator will be on when charging and off when complete.
• In addition to being connected to the USB port for charging, the speaker can be connected to a live AC (main) outlet via the adapter*.
• This speaker features overheat protection which will be activated automatically to stop charging when the temperature is above 50°C (122°F). Charging will be recovered when the temperature goes below 50°C (122°F).
  When the working speaker is above 60°C ( 140°F), the volume will be turned down.

* The adapter (required input 5V DC,3A) is not provided. Please use the required AC power adapter for your region.

Connecting Speaker to Mobile Device (Mono Mode)

Initial use:
Speaker powered on start Bluetooth pairing, please select “I MORE Speaker” from your device list.
Once connected to a device:
Speaker powered on connects to the latest paired device automatically. If the latest device is out of range, the speaker will power off after 5 minutes of searching. Connecting to a new device:
Press and hold the power button for 2 seconds after powering on, speaker will disconnect from the latest paired device and enter pairing mode, after hearing the “Pairing’ command, click the new device in Bluetooth settings to connect. Clear the pairing list:
Press and hold the “I+” and “-” buttons simultaneously for 3 seconds after powering on, the pairing list will be cleared and the speaker will enter Pairing mode.

Connecting Two Speakers to Mobile Device (Stereo Mode)

• Turn on Speaker A and Speaker B to initiate pairing mode.
• Press the power button twice on any Speaker (A or B) to connect to the other. – Speaker A and B are now paired as a stereo system that can be connected to your mobile device by going into the Bluetooth settings and pairing.
• Speaker A is powered on and connected to the mobile device.
• First, disconnect Speaker A from a mobile device to initiate pairing mode. – And turn on Speaker B to initiate pairing mode.
• Press the power button twice on any Speaker (A or B) to connect to each other. – Speaker A and B are now paired as a stereo system that can be connected to your mobile device by going into the Bluetooth settings and pairing.

The Speaker that initiates pairing mode is the “Master”, the other speaker is the “Slave”.

To unpair Speaker A & B:
Press and hold any one of the power buttons while in Stereo Mode.
Switching Bluetooth Codec from SBC to AAC
The Bluetooth codec is MC in Mono Mode use, while SBC is in Stereo Mode. To switch SBC over MC, you need to press and hold “**+**“and “**-**“buttons on one of the speakers for 5 secs to clear the pairing record when speakers are in Stereo Mode and Bluetooth on. When heard —pairing—, the switching is completed.

Power On / Power Off

Power On: Press and hold the power button for 2 seconds. Power Off: Press and hold the power button for 4 seconds.
*** Above functions are available in individual mode, and can also be implemented in Stereo mode.**

Speakerphone Controls

* Above functions are available in Mono Mode. The phone call and voice control functions can also be implemented in the “Master” Speaker in Stereo Mode.

Hands-free Calls
Answer a call from the third party:
Press the power button to answer a call from Phone B, while Phone A retreats to background standby.
Reject a call from the third party:
Press and hold the power button for 2 seconds to reject a call from Phone B. while Phone A stays in-call.
*Above functions are available in Mono Mode and can be implemented in Master speaker in Stereo mode.

Playback Controls

• Above functions are available in individual mode, and can also be implemented in Stereo mode.
• Above functions may vary due to different devices.

Battery Notifications

Battery notification when powered on:
When powered on, you will hear “Battery High”, “Battery Medium’, ‘Battery Low” or ” Power of’ according to current battery status.
Low battery notification:
You will hear “Battery Low” when the battery is running out of charge. The LED indicator blinks twice in 1 second with 2-second intervals indicating the battery is low.
Low battery till power off:
You will hear “Power off” when the speaker is with low voltage. The Red LED indicator will be on for 1 second and then off, will the speaker be powered off.
Note: To maintain battery durability, please charge immediately when hearing the “Battery Low” notification.
Line-in Mode 
You can connect the audio output to the AUX connector after powered on.
* The AUX connector accepts a 3.5 mm stereo cable plug (not provided).

Reset The Speaker
Press and hold the “ ” for 8 seconds to reset and power off.

Download 1 MORE Assistant APP for OTA Upgrade
For a better experience, please download 1 MORE Assistant APP in Mobile Application Store or APP Store for an OTA upgrade.

Product Warranty

1 MORE Inc., (1 MORE) warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one year from the date of purchase, if it is properly used and maintained. If this product proves defective in either material or workmanship, 1 MORE, at its option, will (a) repair the product, or (b) replace the product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, 1 MORE at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. 1MORE assumes no responsibility or liability for such modification. To obtain a repair or replacement under the terms of this warranty, please return to dealer first, if possible, and the dealer will direct you accordingly for repairs or replacement. You will be required to submit a copy of the original receipt.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.

Limitations:

• This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with 1 MORE’s instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an authorized dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.”

We Appreciate Your Business

We know you will enjoy the new 1 MORE headphones as much as we do. At 1 MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1 MORE will treat you like one.

WEEE
Electrical and electronic equipment, parts, and batteries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment.
Your 1 MORE retailer will advise you of the correct way of disposal in your country.

Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.

CE
Operation Frequency: 2402 MHz-2480 MHz
Max. RF power transmitted: 4dBm (Declaration for EU Compliance) Accessories: User Instruction, Type-C Charge Cable

FCC
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

www.1more.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>