1MORE EHD9001TA True Wireless ANC In-Ear Headphones User Guide

1 MORE True Wireless ANC In-Ear Headphones
User Guide 1 MORE

Inside The box

Headphones

Replace

‘Placement

Power

Headphones enter standby mode: Headphones are turned on:

1. When earbuds are placed into charging case with battery.
2. When earbuds are taken out of the case and not used or worn for 3 minutes.
   • Above functions are available for either earbud in individual or Stereo mode.

Pairing the Earbuds

Switching Primary/Secondary Between Left/Right Earbud
Bluetooth Pairing To The Device

Charging

1.  To charge the case with a Type-C cable.
2. To charge the headphones with the case.

Battery Notification

Controls

The above functions may vary with different devices.

Active Noise Cancellation & Pass-Through Function

These headphones include 2 levels of ANC and Pass-through functions for a comfortable listening experience in different noisy environments. To activate them, double-tap the surface of the earbud (left or right) with your fingertips to toggle through different settings.

1. ANC Level 1: suitable for aviation, high-speed train, metro, etc.
2. ANC Level 2: suitable for noisy daily circumstances, such as a mall, café, streets, etc.
3. Pass-through: Let’s in environmental sounds so you don’t need to take out the earbuds to hear what is going on around you.

Extra Functions

1. If headphones cannot pair normally when power on. Open the case, quickly click the pairing button in the case for 3 times to initial search for Left & Right pairing. 2.
2. To unpair the cellphone: Put both L & R into the case, and then press and hold the pairing button in the case for 8 seconds.
3.  OTA Firmware Update: this can be done synchronously with 1 MORE Music APP when Left and Right headphones Bluetooth paired to each other.

1 MORE (1) Year Limited Warranty

1 MORE Inc., (“1 MORE”) warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one year from the date of purchase if it is properly used and maintained. If this product proves defective in either material or workmanship, 1 MORE, at its option, will (a) repair the product with new or refurbished parts, or (b) replace the product with an equivalent new or refurbished product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, 1 MORE at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. 1 MORE assumes no responsibility or liability for such modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit proof of purchasing details, including but not limited to a receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.

Limitations:

•  This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with 1 MORE’s instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.

We Appreciate Your Business

We know you will enjoy the new 1 MORE headphones as much as we do. At 1 MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1 MORE will treat you like one. Tips

1. Please read this instruction manual carefully and retain it for future reference.
2. Please fully charge the battery before first use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
4. Only use chargers that are FCC (Federal Communications Commission) approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of the product.

Safety Information

1.  Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above 113 °F (45 °C).
3. Do not use headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.
8. If you don’t feel comfortable after wearing the headphones, please refer to an aurist for advice on whether in-ear headphones are suitable for you.

WEEK

Electrical and electronic equipment, parts, and batteries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment. Your 1 MORE retailer will advise you of the correct way of disposal in your country. Do not expose batteries or battery packs to excessive heat such as sunshine, fire, or the like.

CE

Hereby, Tiinlab, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 2014 / 53 / EU.

Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc); Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas, and A battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment (VVEEE). This means that this product must be handled pursuant to European directive 2014/53/EU in order to be recycled or dismantled to minimize its impact on the environment. The user has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment. Cato prevents possible hearing damage, do not listen to high volume levels for long periods.

FCC

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQ

1.  The headphones don’t turn on. Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.
2. The headphones and my device do not connect or take a long time to connect. 1) Check that your headphones are in the “pairing” mode (red and blue lights flash alternately). 2) Make sure that your headphones are not connected to other devices, and that your device is not connected to other Bluetooth devices.
3. If headphones fail to connect excluding the above conditions, please press L and R buttons for 5 seconds when charging, and then take them out of the case: a. Press the L and R buttons twice simultaneously to clear pairing records and re-start the pairing between headphones and device. b. Press L and R buttons for 4 times simultaneously to clear pairing records and re-start the pairing between headphones.
4. My Android device successfully connects to the headphones, but the headphones don’t play music. After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Media Audio” option is on. 4. My Android device successfully connects to the headphones, but there is no sound from the headphones while making phone calls. After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio- option is on.
5. The Bluetooth connection is not stable, causing some interruptions. 1) Try shortening the distance between your headphones and device. Avoid solid bafflers in between. 2) Please keep away from strong interference sources, such as Wi-Fi and GPRS. 3) Please make sure the Bluetooth antenna of your device is not blocked.
6. While using third-party music/video player apps, some in-line remote control functions do not match those in the manual. Your operating system and the third-party music/video player apps may have different settings for the in-line remote control functions. We recommend that you use the music/video player apps that your device has originally provided.

Model: EHD9001TA
Headphone Weight (single): 7.9 g
Case Weight: 63.2 g
Product Weight: 79 g
Headphone Size: 30 x 18 x 28.5 mm
Case Size: 81.32 x 30 x 38.5 mm
Headphone Battery Capacity (single): 55 inch
Case Battery Capacity: 410 mAh
Headphone Charging Time: 1 hour
Case Charging Time: 2 hours
Impedance: 32 0
Battery Iife
TrueWireless Stereo Plus Mode: ” Headphones fully charged (ANC oft)
Playback Time: 6 hours *

• Headphones fully charged (ANC on)
  Playback Time: 5 hours
  Headphones & case fully charged (ANC oft)
  Playback Time: 22 hours
  Standard Bluetooth Connection:
  Headphones fully charged (ANC off)
  Playback Time: 5 hours
  Headphones fully charged (ANC on)
  Playback Time: 4 hours *
• Headphones & case fully charged (ANC oft)
  Playback Time: 18 hours
• Wireless Range: 10 m
  Bluetooth: Bluetooth® 5.0 Bluetooth Protocol: HFP / A2DP / AVRCP
  Input: 5V=-1A
  Working Temperature: 0 C – 45 C
  Frequency Band: 2.400 GHz – 2.4835 GHz
  The specifications are acquired from laboratory-tested data.
• The playback time, tested under the laboratory condition of MC format and 50% volume, may vary with different device settings, environments, usage, and other factors.

http://www.1more.com

www.1more.com
FCC ID: 2ASDIEHD9001TA

C E 0 gar ft _
$11iL=A: TI5irriIii-IMiRI tilt: RtilltMLIALICIAFEllitiak A EFIE7. 1403 EritAli: 400-992-0909 Manufacturer: Tiinlab Acoustic Technology Limited Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan St, Nanshan Dist., Shenzhen, P.R. China Product information can be found at www.1more.com Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>