SEEKCY S7U Low-Power Bluetooth iBeacon Instruction Manual
- June 6, 2024
- SEEKCY
Table of Contents
SEEKCY S7U Low-Power Bluetooth iBeacon
Suzhou Seekcy Electronic Technology Co., Ltd
All rights reserved
www.seekcy.com
Edit history
| Modificate Date | Version | Author | Content |
|---|---|---|---|
| 2021.3.14 | V1.0 | YoJoe | The first version |
Product introduction
Application scenarios
IBeacon is a low-power Bluetooth technology for positioning and marketing,
supported on iOS and Android.Seething S7U iBeacon adopts the lowest power
consumption chip and the highest energy density lithium battery scheme, with
long node life time, convenient deployment and disassembly, and low price. It
can be widely implemented in hospitals, nursing homes, shopping malls,
airports, exhibition halls and other public places to build positioning and
marketing service network.
Battery endurance
S7U adopts advanced power consumption control technology and unique power
supply design method, and the battery life of the nodes is four times higher
than that of the same class (size) nodes in the industry.It can be used for
five to six years to better solve the problem of frequent battery replacement
and difficult system maintenance.
Deployment scheme
S7U adopts knob-type hanger installation structure, which can be installed
very quickly, and easy to remove and replace the battery.Adopt high quality
VHBTM gum, and can support screw fixed installation, the installation effect
is stable and reliable.
Technical parameters
Table 1 S7U technical parameters
| S7U
---|---
Chip| Dialog DA14580
Support standard| Bluetooth BLE 4.0，Apple Company iBeaconStandard
Battery| ER14505 2400mAh
Tx Power| 0dBm or -20dBm
Signal Coverage| Up 80m
Battery Endurance| 5~6years
Protection Grade| IP64
Size| Diameter 65mm，thickness 25mm
Weight| 55g
Support OS| iOS7.0 and above，Android 4.3and above
Security| Password protection,Tamper-proo
APP Config| UUID modification，Major，Minor，broadcast interval，tx
power，password
Other performance| Provide SDK for development
Characteristic
| Node signal stability, supporting rack installation accessories, easy installation and later maintenance, supporting a powerful and stable
configuration tool APP
| S7U | |
|---|---|
| Chip | Dialog DA14580 |
| Support standard | Bluetooth BLE 4.0，Apple Company iBeaconStandard |
| Battery | ER14505 2400mAh |
| Tx Power | 0dBm or -20dBm |
| Signal Coverage | Up 80m |
| Battery Endurance | 5~6years |
| Protection Grade | IP64 |
| Size | Diameter 65mm，thickness 25mm |
| Weight | 55g |
| Support OS | iOS7.0 and above，Android 4.3and above |
| Security | Password protection,Tamper-proo |
| APP Config | UUID modification，Major，Minor，broadcast interval，tx |
power，password
Other performance| Provide SDK for development
Characteristic| Node signal stability, supporting rack installation
accessories, easy installation and later maintenance, supporting a powerful
and stable configuration tool APP
Configuration Tool APP
The mobile app to configure ID,Tx Power,Broadcast Interval.
The QR code for the app is shown below:
Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>