Willful T3 True Wireless Earbuds Stereo Sound-Complete Features/Instruction Guide

Willful T3 True Wireless Earbuds Stereo Sound

Specifications

• Brand : Willful
• Style: In-ear
• Vocalism Principle: Dynamic
• Bluetooth version: Bluetooth 5.0
• Waterproof Level: IPX7
• Compatible protocols: HFP, HSP, AVRCP, A2DP
• Chip: AB1536U
• Decoding method: SBC AAC
• Range of application: Up to 32 Feet
• Battery capacity: Earbud: 40mAh & Charging box: 500mAh
• Communication: True Wireless
• Wireless Type: Bluetooth
• Frequency Response Range: 2.402-2.480GHz
• Net weight: 54.1g
• Dimensions of charging box: L:65.05W:56.32H:25.60mm

Introduction

The earphones have a built-in microphone that allows for use in calls. It’s not just for music. It has wide Compatibility/Auto Pairing. After the first pairing is complete, take both earphones and they will automatically link with your devices. These are compatible with most Bluetooth 2.0 and above devices, including iPhones, Android phones, tablets, and computers. the earphones have two modes; Mono mode/dual mode.

Enjoy HD stereo sound with both earbuds in dual mode.  Mono mode helps you to connect the left and right earbuds to different devices individually. It has the long-lasting battery. It has up to 5 hours of playback on a single charge of 2 hours, with an additional 20 hours for each earbud supported by the portable charging case. It comes with 3 sizes of ear tips for comfort. Wear it in comfort and security with three sizes of silicone tips supplied.

What’s in the box

• 1 x T3 True Wireless Earbud
• 1 x Charging Case
• 3 x Ear tips
• 1 x Micro USB Charge Cable
• 1 x User Manual

**How to pair**

• Taking the headphones out of the charging case.
• Keeping the power button pressed and held.
• The charging case is opened.
• Take the earbuds out of the charging case and replace them.
• The charging case’s pairing button is pressed.
• The earbuds’ pairing button is pressed.
• Swipe down the shade of Notifications on your phone.
• In the top row of icons, press and hold the Bluetooth symbol.
• Make sure the toggle switch at the menu’s top is turned on. Then hit the item you wish to pair at the bottom of the Bluetooth list.
• Tap Pair.
• The device will move to the top of the list once you’ve successfully linked it, indicating that it’s ready. Often, the earbuds will provide an audible cue.

Frequently Asked Questions

• What are your thoughts on using willful earbuds?
  Simply remove Willful from the charging case, the earbuds will immediately link and enter pairing mode, then turn on Bluetooth on your phone or another device, then select “willful” from the Bluetooth list to complete the pairing.

• What’s the best way to pair willful earbuds?
  Simply remove both earphones from the charging case, and they will instantly turn on and pair. To pair the earphones, go to your phone’s Bluetooth settings and select “Willful.”

• How can I activate my obnoxious earbuds?
  To pair the earphones for the first time, open the charging box and turn on the Willful T7 earbuds; they will immediately power on and begin left and right earbud connection.

• How do I connect my phone to my willful headphones?
  To link the headset, turn it off and on again, then look for and click “M98” in the Bluetooth device listings on the second device (phone, PC, laptop, etc.). After being connected, the blue LED flashes once every 10 seconds.

• What is the best way to pair Iyesku earbuds?
  Press both earbuds’ power buttons until the Red and Blue lights flash. Alternatively, bring two earphones together and they will begin to match automatically. The blue light of the secondary Earbud (L) flashes gently after pairing, and the master earbud (R) begins matching again while waiting for the phone to connect.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>