Panic PDD-01 Playdate Stereo Dock Instructions

Panic PDD-01 Playdate Stereo Dock

Playdate Stereo Dock PDD-01

POWER ON/OFF

Press POWER KEY to turn ON/OFF the unit.

BLUETOOTH PAIRING

1. Search BT Device ” PDD-01″
   Select and Pair BT Device ” PDD-01″.
   Succesful pairing Melody Sound will be heard.
   Blue Led is lit up.

BLUETOOTH UNPAIR

1. Long Press (more then 3 sec) to unpair the device. Successful unpair Melody will be heard.
   Blue Led is blinking.

VOLUME UP/DOWN

1. Turn Rotary Switch clock wise , volume is increased. When volume reach maximum level, Green Led will blink.
2. Turn Rotary Switch counter clock wise , volume is decreased. When volume reach minimum level, Red Led will blink.

Auto Power OFF

When the Unit is inactivity for about 5 minutes , the Unit will turn OFF.

RESET

If the Unit operation system is hang, you need to RESET the Unit. Use a small sharp pin tools, press the RESET key once. The Unit will turn OFF and Led indicator is OFF.

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED compliance statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
   Radiation Exposure statement
   This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux radiations FCC/IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>