ENCASED CMMAG-A Magnetic Wireless Charging Car Mount User Manual
- June 6, 2024
- ENCASED
Table of Contents
ENCASED CMMAG-A Magnetic Wireless Charging Car Mount
MOUNTING & CHARGING INSTRUCTIONS
This MagCharge enabled car mount wireless, charges your phone.
- Plug the car charger into your car’s power outlet. Plug the included type-c cable into the charging port©.
- Place your phone over the charging area@. Built-in magnets will automatically align your phone and it will start charging.
- The arms @with automatically clap close to securely hold your phone one charging is detected.
- To release your phone touch the “Touch Button”@ on the back of the phone holder. Touch again to close the mount.
INDICATOR LIGHTS:
Standby Mode: LED flashes Green then Blue and then is steady Green. Charging
Mode: LED is steady Blue
FOO Mode: Blue and Green light with flash and then charging will turn off
until the metal object is removed.
FEATURES:
NPO capacitors allow for lower charging temperatures and higher charging efficiency. FOD (Foreign Object Detection): Stops charging when a metal obstacle is detected that would damage your device.
SPECIFICATIONS
| Input | DC 12 V/1.5A , 9 V/1.67A , 5V/2A |
|---|---|
| Output | 15W / 10W / 7.5W / 5W |
| Product Standard | Qi |
| Charging Distance | 5 10mm |
| Charging Efficiency | 5 80% |
| Product Dimension | 75.5mm166.9mm193mm |
| Product Material | ABS+Silicone |
FAST WIRELESS CHARGING REQUIRES QC2.0 / 3.0 QUICK CAR CHARGE
PRODUCT DESCRIPTION
ATTENTION
Do not dismantle or put the product into fire or water when it is powered on, to avoid short circuit. Do not use it in severely high temperatures, high humidity or corrosive environment, to avoid damage to the circuit. Do not put a magnetic strip or chip card (i.e. Credit Cards or Entry Cards) on the charging pad which may cause the magnetic stirp on the card to lose efficacy. Do not put the metal (Such as coin etc.) on the charging pad when charging, to avoid damage an or over-heating.