ENCASED MSPB5010 Magnetic Wireless Power Bank User Manual
- June 16, 2024
- ENCASED
Table of Contents
ENCASED MSPB5010 Magnetic Wireless Power Bank
Compatible Models
- For iPhone: iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, Phone 13 mini, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone XS, iPhone XS Max, iPhone XR, iPhone XR Max, iPhone 8, iPhone 8 Plus,
- For Samsung Phone: Samsung Phone Galaxy 522 522+ 522 Ultra 521/521 Ultra, S20 5G/S20 Ultra 5G, S10/S10e/S10 5G/S10+,59/59 +, 58/58+/58 Active, S7/S7 Edge/57 Active, S6/56 Edge+/56 Active, Samsung Note 20/20Ultra 5G, Note 10/10+/10e, Note 9, Note 8, Note 7, Note 6, Note 5
Warm Tips
Please pay attention to the following issues, otherwise, it may cause irregular charging, high charging temperature, intermittent charging, or even no charging.
- Please place your phone/watch/ in the correct charging area.
- The charging distance is 2-8 mm, please do not wear a protective cover thicker than 3 mm.
- No metal or magnetic objects in the center 6 cm of the back of the phone during charging.
- The lower the temperature, the faster the charging speed.
- Charging speed is faster in winter than in summer.
- Please do not charge in a hot and humid environment to avoid damaging the circuit.
- Please put it out of reach of children to avoid unnecessary accidents.
- Make sure to use the original charging cable and adapter.
SPECIFICATION
- Model: MSPB5010
- Product: Magnetic wireless power bank
- Capacity: 5000mAh
- Type-c Input: 5V/3A;9V/2A; 12V/1.5A
- Type-c Onput: 5V/3A;9V/2.22A; 12V/1.67A
- Wireless charging Output: 5W/7.5W/10W/15W
FCC STATEMENT
This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.