ENCASED CM180 Squeeze Cup Car Mount User Manual

User Manual

MOUNTING & CHARGING INSTRUCTIONS

This MagCharge enabled car mount wireless, charges your phone.

1. Plug the car charger into your car’s power outlet. Plug the included type-c cable into the charging port 1.
2. Place your phone over the charging area 2. Built-in magnets automatically align your phone and it will start charging.
3. The arms 3 automatically clap close to securely hold the phone once charging is detected.
4. To release your phone touch the “Touch Button” 4 on the phone holder. Touch again to close the mount.

INDICATOR LIGHTS:
Standby Mode: LED flashes Green then Blue and then is steady
Charging Mode: LED is steady Blue
FOD Model: Blue and Greenlight with flash and then charging off until the metal object is removed.

FEATURES:
NPO capacitors allow for lower charging temperatures and charging efficiency.
FOD (Foreign Object Detection): Stops charging when an obstacle is detected that would damage your

SPECIFICATIONS

FAST WIRELESS CHARGING REQUIRES QC2.0/3.0 QUICK CAR CHARGE

PRODUCT DESCRIPTION

1. Assemble mount:
   A. Place the ring over the round knob.
   B. Insert the knob into the socket on the cradle and faster with the ring.

2. installing in the cup holder
    Place mount into your cup holder and twist to extend the base until it fits snugly.
   The expandable base securely fits most automobiles cup, holders

ATTENTION

Do not dismantle or put the product into fire or water when it is powered on, to avoid short circuits.
Do not use it in severely high temperatures, high humidity, or corrosive environment, to avoid damage to the circuit.
Do not put a magnetic strip or chip card (i.e. Credit Cards or Entry Cards) on the charging pad which may cause the magnetic stripe on the card to lose efficacy.
Do not put the metal (Such as coins etc.) on the charging pad when charging, to avoid damage or over-heating.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>