ECOLOR E0106 Smart LED Strip Lights User Manual
- June 6, 2024
- ECOLOR
Table of Contents
ECOLOR E0106 Smart LED Strip Lights User Manual
What’s in the Box
Specifications
| Length | 16.4ft/5m |
|---|---|
| Color | RGB |
| Operating Method | IR Remote/Controller/ |
Bluetooth APP
Power Supply| 12V (1.5A)
Energy Usage| 18 watts
Working Temperature| 14°F~104°F
Installation
Make sure your lights are in good condition and test whether they could work before installation.
a) Wipe the surface to keep it clean and dry.
b) Remove the release liner and firmly press the strip for 30 seconds.
c) Connect the controller to the adapter.
d) Connect the controller to the adapter.
Downloading
Download and install “ Ecolor Life ” app via IOS APP Store (devices with IS 9.3+) or Google Play Store (devices with Android 4.3+).
Setting up
- Turn on the light you are adding to the APP.
- Turn on your Bluetooth and open the “ Ecolor Life ” APP
- Tap the “ + ” icon in the top-right corner and select “ E0106 “.
- Control the strip light with your app after successful connection.
- Name your strip light to easily match with next time and start using it.
Ecolor Life
Remote diagram
Notes
a) Keep the product away from sharp objects or dangerous chemicals. like corrosive acid or alkali.
b) LED components should be avoided twisting when the product is being installed so as to minimize damage and prolong service life.
c) Make sure the contact surface between the strip light and the intended sticking surface without conductive items like nails. If there is, please remove conductive items before you stick the strip to prevent short circuit in use.
d) Please do not touch the lights with your hands since static electricity shocks in cold and dry winter may burn the lights and other components.
e) Please keep the product away from heat sources.
f) Children should not change a light bulb without adult assistance
Customer Service
Warranty: 12-month Limited Warranty
Support: Lifetime Service Center
Email: [email protected]
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.