Shenzhen Chileaf Electronics CL880 Heart Rate Wristband User Guide
- June 6, 2024
- Shenzhen Chileaf Electronics
Table of Contents
Heart Rate Wristband
User Guide
Instructions For Quick Use Of Wristband
An Introduction to Components
To install Wristband APP
Scan the following QR code or enter the application markets to download and install it. “X-Finesse
Device Attachment
When being used for the first time, it is necessary to connect the APP for
alignment After successful connection, the wristband will self-synchronize
time, or otherwise, step calculation and sleep data won’t be accurate.
Open the phone APR Click My Icon.
Add device (10S) / Add device (Android)
Click the search icon in the upper right
Click the device connection
Raising up and rotate your wrist to turn on the display
Bluetooth connection: after successful matching, APP will automatically
save the wristband Bluetooth address. When APP is opened or operated in the
background, it will automatically search and link with the wristband.
Data Synchronism: manually pull down the synchronization data on The APP
home page; the wristband can store offline data for 7 days, the more data, the
longer the synchronization time is, and the longest time is about 2 minutes.
Buttons and Display
Slide: Switch
Hold: Enter / Exit Application center
Touch: open application
- Slide on the screen to wake up the display, slide to switch between timing, message, application, training mode, calories, steps, The device will automatically enter power-saving mode if no operation within 10 seconds, then the display will be off.
Functions and Operations
Main Page (The time will be automatically updated when synced with the App)
Messages (The following functions need to connect with the APP.)
- Operation
Hold the screen to check the message, slide left / right to switch the pages.
Application Center
(The following functions need to connect with the APP.)
- Operation
Hold the screen to enter the application center, slide to check the application, hold the screen to exit the application center.
| Music Control (the phone need to open the music APP)
Remote Camara ( the phone need to open the camera function)
Find the phone ( the phone will ring )
Landscape Display (Touch to rotate )
Portrait Display (Touch to rotate )
---|---
Training
( The following function need to be connected with the APP )
- Operation
When using the training function, please:
-
Make the sensor on the back cover of the wristband stay firmly with the skin.
-
Wear the watch 2*-3′ above -not on- your wrist bone; wear it higher on the forearm when using this watch as a heart rate monitor, especially if you have a small wrist
-
Touch and hold the screen to enter Training Mode, and open ‘Training’ at the APP before the training, when the training is completed, the APP will store the training data automatically (Meanwhile, touch and hold the screen to finish training function in the device).
-
When not using the “training” in the app, the training mode is also available, slide to check the heart rate, training time, steps, calories, touch and hold the screen to finish training record will not be saved.
Other Function
“ ” Steps, ” “calories, this is the data for the intraday ( the data uploaded to the clouds when connect to the APP) ‘2
| Incoming Calls Reminder
Alarm (Set in the sleep part in the APP: Awake time
=Alarm vibration reminder)
Drink Reminder ( Open / close in the app)
Break Reminder ( Open / close in the app)
Other Reminder( Open / close in the app)
---|---
Raising up and rotate your wrist to turn on the display
Specification
Model: CL880
Function: Optics Sensor; Heart Rate Monitoring, Steps Count Calories Count,
Sleep Monitoring, Remote Photo Taking, Remote Music Control.
Dimensions: L250xW2OxH16 mm
Display Type: Full-Color TFT LCD;
Resolution: 128..64;
Battery Type: Rechargeable Lithium battery;
Battery Life Cycle: 300 charge cycles;
Button Type: Touch sensitive button;
Data transmission: Bluetooth5.0
Phone call reminder: Phone call vibrational reminder;
Water Proof: WU;
Disclaimer
a. The product it describes are subject to change without prior notice, due
tothe manufacturer’s continuous development program.
b. Our company makes no representations or the products described herein.
c. Our company shall not be liable for any damages, losses, costs or expenses,
direct, indirect or incidental, consequential or special, arising out ot or
related to the use of this material or the products described herein.
EU-DECLARATION OF CONFORMITY
Hereby, declare that Heart Rate Wristband (model:Cl/380) is in compliance with the essential requirements and other relevant provisions of Directive RED 2014/53/EU. A copy of the signed and dated Declaration of Conformity is available
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and bound to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure statement. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>