LT-01 Minisounds-6W Wireless Speaker with Double Loudspeaker Instruction Manual
- June 6, 2024
- MINISO
Table of Contents
LT-01 Minisounds-6W Wireless Speaker with Double Loudspeaker
Product and Accessories
- button: long press to volume-, short press to previous
- button: short press to pause/play music, long press to power off.
- button: long press to volume+, short press to next
- charging port: DC-SV power supply
- LED indicator light
- USB charging cable
Specifications
- BT version:VS.O BT Pairing name: LT-01
- Function: BT connection Input: DCSV,lA
- Built-in Battery: 3.7V lithium battery 1200mAh
- Frequency range: 160Hz-18kHz Sensitivity: ;;,.ssdb/w/m
- Rated power/largest power: 3W*2 Charging port: Micro USB
- Transmission distance: around !Om Music time: About 2-4h
- Charging time: Around 2.Sh Standby time: Around 30 days
Usage Instructions
-
Pairing
Long press@ button, and the speaker will enter pairing mode while the LED indicator light will flash blue and orange alternatively, with a power on” prompt. Activate BT function on the phone and search LT-01 to click for BT connection. LED indicator light will stay orange upon completion of pairing. with a “successful connection” prompt.
Note : This product supports auto reconnecting function and may connect with the device connected the previous time after turned on. -
Turning off
When turned on, hold@ button to turn it off, with a “power ofP’ prompt. -
Charging ® is the USB charging cable After connecting the charging cable with the compatible DC power adapter (DCSV, lA), plug the other end of the cable into the charging port of the product in order to charge it.The LED indicator light will stay bright red during charging and dim out after fully charged.
-
Functions/Operation of Speaker
| Function | Operation |
|---|---|
| Play/Pause | Short press@ button when music is on |
| Next | Short press@ button when music is on |
| Previous | Short press <D button when music is on |
| Volume up | Hold@ button when music is on |
| Volume down | Hold <D button when music is on |
| Low power Prompt | Prompt wilt be heard when voltage reaches 3.2V. |
Power off under
Low power
| Speaker will be power off upon a prompt
When voltage reaches 3.0V.
Power off upon Pairing time-out|
Environment-Friendly disposal
You can help protect the environment! Correct Disposal of ProductThis mark indicates the product should not be disposed of in the same way as other household wastes in EU regions. The product should be recycled to ensure sustainable reuse of resources and to prevent potential harm for the environment and human health caused by non-control of waste management. To recycle the used appliance, apply the recycling system or contact the franchiser to recycle the product according to the environmental protection requirements.
FCC Requirement
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to theuse harmful interference, and(2) this device must accept any Interference received, including Interference that may cause undesired operation.Class Note: B This digital equipment device, has pursuant been to tested Part 15 and of the found FCC to Rules. comply with the limits for a These limits are designed to prO\llde reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MADE IN CHINA
www.miniso.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>