Transtyle Technology T48 4K Action Camera User Guide
- June 6, 2024
- Transtyle Technology
Table of Contents
Transtyle Technology T48 4K Action Camera
What’s Included
- Action Camera
- Micro USS Cable
- Helmet Mount
- Mount 1
- Waterproof Casing
- Bicycle Mount
- Helmet Mount Band
- Adhesives
- Clip
- Detachable 3.7V 900mAh Li-ion Battery
Micro SD memory card not included
Parts of the Camera
Initial Setup
Note: This camera is powered by a detachable lithium battery, To charge the battery, use the included Micro USB cable to connect your camera to your computer’s USB port or a suitable USB charging adapter (not included)
Class 10 or higher Micro SD memory card{l 6-l 28GB) needed for normal use.
( Note: Please format it with this camera before using it.)
How to use the accessories
Bicycle Sport Edition
Helmet Edition
Reminders about Waterproof Casing:
- Before opening the waterproof casing and putting the device in, carefully check whether the waterproof ring of the casing is flat and smooth.
- After placing the device in, carefully close the cover of the waterproof casing. Once closed, be sure that there are no deformities in the waterproof ring and that the case is closed securely.
Main Camera Modes
Your camera has different modes for the various camera functions. You can switch modes by pressing the Mode/Power button after the camera has been powered on. While in the Video or Photo Mode, press and hold the Shutter/OK Button to switch between the front and back screens. While in the 2.0 Inch Screen’s Video or Photo Mocle, Press and hold the Multi-function button to open the Wi-Fi function. With Wi-Fi turned on, press the Shutter/OK Button to turn off Wi-Fi.
To make changes to the camera’s settings, follow the instructions below to enter the multi-function setting interface:
After turning on the camera, while in the 2.0 Inch Screen’s Video or Photo
Mode, press the Multi-function button to enter the multi-function setting
interface. Press the Multi-function button again to toggle between the below 4
choices, and then press the Shutter/OK Button to enter.
Note; While in the 13 Inch Screen, it can only support take Videos or
Photos, it can not support turning on Wi-Fi or make camera’s
settings.
- Video and Photo MocleSettings
- Playback Mode
- Setting Menu
- Exit
Video and Photo modes setting
Enter Video and Photo Mode to select: normal recording, slowly recording, loop
recording, time-lapse recording, ordinary photo, automatic photo, continuous
photo and timer photo modes.
Playback Mode
After selecting this function, the camera enters the playback mode. In this
mode, press the Multi-function button to scroll through the videos and photos
files. If you select a video, Press the Shutter/OK button to start the video
playback or to stop the video playback. If you would like to delete the photo
or video, press and hold the Shutter/OK button to view the delete menu
options.
For more information, please refer to the camera’s User Manual in the
software.
Setting menu
Open the camera settings menu to enter the menu options.
Press the Power/Mode button on the menu interface to toggle between different
setting menus: Current mode setting menu camera system setting menu Exit
Once you are in the desired setting menu, press the Multi-function button to
scroll through and select a setting option. Then press the Shutter/OK Button
to enter the options for the selected setting.
Note: Setting options in gray font are functions that cannot be used in
this mode and cannot be selected
- Current mode setting menu: In any working mode, if you enter the Multi-function setting intelface and open the menu setting, the first page of the menu setting is the current working mode setting menu, and the corresponding mode icon is displayed. Press the Multi-function button to scroll through and select a setting option, and then press the Shutter/OK button to confirm.
- camera system setting menu: Press the Power button to switch to this menu. Press the Multi-function button to scroll through and select a setting option, and then press the Shutter/OK button to confirm.
Exit: Press the Power button to toggle to the exit item. Then press the Shutter button to confirm and exit.
Video Capture Mode
Use this mode to capture videos with your camera, when the camera is in Video
capture mode. To take a video, aim your camera as desired and press the
Shutter/OK button to start recording. To stop recording, press the Shutter/OK
button again. the Video is automatically saved to your camera’s memory card
(not included).
To access the various Video capture mode settings, while in the 2.0 Inch
Screen’s Video or Photo Mode, press the Multi-function button. Press the
Multi-function button to toggle to the Video and Photo mode settings,and then
press the Shutter/OK Button to enter. You can choose normal recording, slowly
recording, loop recording or time-lapse recording mode. Select the recording
mode and then press the Shutter/OK button to confirm your choice. To access
the various Video capture menu settings, when in 2.0 Inch Screen’s Video
Capture mode, press the Multi-function button. Press the Multi-function button
to toggle to the setting menu, and then press the Shutter/OK Button to enter.
Press the Power/Mocle button to toggle to the Video capture menu setting.
Press the Multi-function button to scroll through and select a setting option,
then press the Shutter/OK button to confrm.
Normal video mode
In this mode, press the Shutter/OK button to start recording. At this time,
the original white mode icon in the upper left comer of the screen turns to
red, and the recording duration starts. Press the Shutter/OK button again to
stop recording and save the file.
Slowly video mode
In this mode, the slowly video icon is displayed in the upper left corner of
the screen. You can set the slow motion and slow speed in this mode menu
setting. Press the Shutter/OK button to confirm.
Loop video mode
In this mode, the loop video icon is displayed in the upper left corner of the
screen. You can set the length of each video and video resolution in this mode
menu setting. Select your option and then press the Shutter/OK button to
confirm.
Time-lapse video mode
In this mode, the time-lapse video icon is displayed in the upper left corner
of the screen. rime-lapse recording parameters and video resolution can be set
in this mode menu setting. Select your option and
then press the Shutter/OK button to confirm.
Note: When in Normal Video or Loop video mode, and in 2.7K or 1080P
resolution, you can open the EIS function.
For more information, please refer to the camera’s User Manual in the
software.
Photo Capture Mode
Use this mode to capture pictures with your camera when the camera is in Photo capture mode. Press the Shutter/OK button to take the photo. The picture is automatically saved to your camera’s memory card (not included).
To access the various Photo capture mode settings, while in 2.0 Inch Screen’s
Photo Capture Mode, press the Multi-function button. Press the Multi-function
button to toggle to the Video and Photo mode settings, and then press the
Shutter/OK Button to enter. You can choose ordinary photo, automatic photo,
continuous photo and timer photo mode.After selecting your option, press the
Shutter/OK button to confirm your choice. To access the various Photo capture
menu setting, when in 2.0 Inch Screen’s photo Capture mode, press the Multi-
function button to enter the Multi-function setting interface. Press the
Multi-function button to toggle to the setting menu, and then press the
Shutter/OK Button to enter. Press the Power/Mode button to toggle to the Photo
capture menu setting. Press the Multi-function button to scroll through and
select a setting option, and then press the Shutter/OK button to confirm.
For more information, please refer to the camera’s User Manual in the
software.
Ordinary photo mode
In this mocle, the camera icon is displayed in the upper left corner of the
screen. You can set the camera pixels and other parameters in this mode menu
setting. Press the Shutter/OK button to confirm.
Automatic photo
In this mocle, the auto photo icon is displayed in the upper left corner of
the screen. You can set the photo interval in this mode menu setting. Press
the Shutter/OK Button, the camera starts to take photos continuously at the
set interval, press the Shutter/OK Button again to stop.
Burst photo
In this mode, the continuous photo icon is displayed in the upper left comer
of the screen. The number of continuous shots can be set in this mode’s menu
setting.
Note: The camera needs a certain amount of time to store the photos
during continuous photo shooting. When you press the Shutter/OK button before
the storage is completed, you cannot take another photo.
Timer photo
In this mode, the timer camera icon is displayed in the upper left corner of
the screen. You can set the timer time in this mode menu setting.
Press the “Shutter Button’ to start the camera’s countdown. When the countdown
ends the photo is taken.
Connect to the Vivitar 922EIS App
The Vivitar922EIS App lets you control the camera remotely using a smartphone
or tablet.
On your mobile device, please download “Vivitar 922EIS’from either the Google
Play Store or ther Apple App Store. Alternatively, scan the QR code below to
download the App. Press and hold the Multi- function button to open the Wi-Fi
function while in the 2.0 Inch Screen’s Video or Photo Mode. Your camera’s LCD
screen will display the camera’s Wi-Fi name and password. The camera’s Wi-Fi
name is “DVR922EIS-XXXX’. The password is “12345678”.
Search this Wi-Fi name in your mobile device’s Wi-Fi settings and select it to
connect your camera to your mobile device. Enter the password on your mobile
device when prompted to complete the connection. Then open the “Yivitar
922EIS’ App and start enjoying your camera with the App.
Note: for IOS system, please play the 4k60fps video by third party player
Change or modifications not expressly approved by the party responsible for
compllance could void the user’s authority to operate the equipment.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the Wmits for a Class B digital device, pursuant to Part 15 o( the FCC Rules. These limit:5 are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energyand,if not installed and used in accordance with the instruction cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation
If this equipment does cause h~nnful interference to radio or television reception, which can be determined by turning the equipment off and oo,the user is encouraged to try to correct the interferen,::e by one or more of the following measures
- Reorlentorrelocatetherecelvlngantenna.
- lncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>