Sarabec Chime Flash Doorbell Push Transmitter Instruction Manual
- June 6, 2024
- Sarabec
Table of Contents
Chime flash
Doorbell Push Transmitter
Introduction
The chime flash Doorbell Push is a replacement or extra push that will pair to
your chime flash receiver unit.
Product Overview
- Push Bu on
- Push Indicator
- Moun ng Bracket
- Battery Cover
- Battery Compartment
Installation
Push the locking tab slightly away from the transmitter and turn the wall
bracket on the underside of the transmitter 90° to the plate. The bellpush can
now be removed (pulled away) from the plate.
Insert the supplied CR2032 battery as shown (Posi ve side upwards). We
recommend aching the bellpush mounting plate to your door or frame using the
sticky pad already attached. The provided screws and plugs can be used for
fixing the bellpush to masonry.
The Bellpush should be fitted to the mounting plate at a 90-degree angle and
then rotated either clockwise or an -clockwise until a click is heard.
Programming & Setup
- Press & hold the setup bu on for 2-3 seconds, the green doorbell symbol will illuminate and flash at a steady rate.
- Press the bellpush bu on, the green symbol on the receiver will flash rapidly for 1 second and a single beep will be heard, this indicates that the bellpush and receiver are now paired.
Melody Selec on
There are 4 doorbell melodies and 2 telephone melodies to choose from.
Press and hold the setup bu on for 2-3 seconds to enter setup mode, the green
symbol will steadily flash. Release the setup button.
If this is the symbol you would like to change the melody of then simply
rotate the setup button until you hear the sound you wish to keep. If you wish
to change the sound on the orange symbol press the setup bu on once, the bell
symbol will flash, and follow the instructions above.
Once the desired melody is selected press the setup bu on to exit the setup
mode.
Sarabec Ltd
15 High Force Road
Middlesbrough
United Kingdom
TS2 1RH
Telephone: 01642 247789
email: mail@sarabec.co.uk
website: www.sarabec.com
Full system instruc ons available on our website.
This item carries a 1-year guarantee, please contact your point of sale in
the event of any issues.
Sarabec Ltd declares that crime flash complies with all relevant UK Statutory
Instruments.
Sarabec Ltd declares that crime flash complies with all relevant EU
directives.
Sarabec’s EU authorised representa ve: HUMANTECHNIK GmbH, Im Wörth 25, D-79576
Weil am Rhein , Germany.
The full declara on of conformity for the Chimeflash is available from Sarabec
Ltd.
The Wheelie bin logo is the industry-wide symbol for this type of product.
The symbol, when appearing on electronic products, indicates that the item
should NOT be treated as ordinary household waste when due for disposal.
Crime flash Doorbell Push Tx Issue 1 May 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>