Casper Glow Magical Light for Better Sleep User Guide
- June 6, 2024
- CASPER
Table of Contents
PRINT VIEW
WELCOME KIT
Glow
A magical light for better sleep
A light designed to help you fall asleep.
Brilliant.
Most lights keep us up. Even bedroom lighting. That’s why we made Glow — a light that helps us wind down naturally for better, deeper sleep.
Give it a try!
(1) You may need to charge Glow for 15 minutes to wake it up. (It was a long night.)
(2) Flip to turn it on. It will start slowly dimming all on its own.
(3) Give it a twist to adjust the brightness at any time.
(4) Press either button to pause dimming. Press again to resume.
(5) Flip to turn off.
(6) Download the Casper App to access settings and additional features: casper.com/glow-app
Know your Glow
It might seem like magic, but there are a lot of smarts inside this little light.
Glow
Charging Base
(a) Buttons
Easy access to pause and more from either end
(b) Durable shell
Diffuses light and withstands normal wear and tear
(c) Warm light
2700K high-efficiency LED light helps you avoid harmful blue light
(d) Movement sensors
Accelerometer and gyroscope help you control Glow intuitively
(e) Ambient light sensor
Sets the perfect light for your environment
(f) Charging rings
Wirelessly connect to charging base from either end
(g) Charging pins
Charge Glow on contact
(h) Grippy rubber bottom
Stays in place on flat surfaces
Control with the Casper App
Manage and customize settings from your phone
Gestures, settings, and more
Turn on and start dimming
Flip Glow to turn it on. The light will slowly dim and get warmer until it
turns off.
• Dims over 45 minutes
• Customize dimming duration with the App
• All grouped lights turn on and dim together
Adjust brightness
Rotate it to adjust the light level.
• Clockwise → brighter
• Counterclockwise → dimmer
Use as a guiding light
Want a midnight snack? Simply lift and give it a gentle wiggle to turn on the
softest light setting.
• Will begin dimming as usual
• If grouped, only the Glow that you wiggle will turn on
Pause
Press either button to pause brightening or dimming.
• Pulse indicates it’s paused
• Press again to unpause
Create and manage groups
Download the Casper App to group and manage multiple Glow lights.
Control a grouped light
While the group is on, press and hold the button on the light you want to use
independently for 3 seconds. They’ll link back up the next time you turn them
on again or if you hold the button.
Turn off
Feeling sleepy? Flip Glow over at any point, and it’s lights out.
Schedule a wake-up
For a little help getting up in the morning, use the App to schedule a wake-
up. Set a time, and the light will slowly brighten to help ease you into the
morning.
Charge
Place on the charging base so the charging rings (on either end of Glow) and
pins make contact.
• Amber pulse indicates charging
• 3 amber pulses indicates low battery
Power on or off
Press and hold the button for 6 seconds to power off. Press and hold again to
power on.
• When off, Glow will stop responding to gestures
• Power off for travel
Reboot
If Glow is unresponsive or on the fritz, a reboot may fix it. Press and hold
both buttons until Glow turns on briefly. This takes about 30 seconds.
Factory reset
Press one of the buttons 6 times while holding the other button down.
• Returns to default settings
• Will be removed from any groups
Warranty
Learn about our limited warranty at
casper.com/warranty
Support
Our team is available seven days a week to answer every question under the
moon.
1-833-220-4569
support@casper.com
casper.com/faq
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and, (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
NOTICE: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Radio Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID: 2AQFW-G01B
CANADA
This Class B digital apparatus complies with Canadian ICES-003
This device complies with Industry Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept
must accept any interference, including interference that may cause undesired
operation of the device.
IC: 24090-G01B
WARRANTY
This product is covered by a limited warranty from Casper.
For warranty details, visit casper.com/warranty.
Product Family | Connected |
---|---|
Product | Glow |
Description | Welcome Kit - Light Engine |
Part | 194-000026-002 |
Region | North America |
Dieline Ref. | 194-000026 |
---|---|
Material | **0.15mm Uncoated Wood Free Paper |
(Ref. Mohawk Via Stellar White Vellum 70# Text)
Dim| 6.25 x 4.3 in
Colors| CMYK| Pantone 280 U| Matte Aqueous**
Notes
Rev. | Date | Description | Revised By |
---|---|---|---|
A | 20 09 08 | Initial Release | s young |
194-000026-002-RevA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>