Tefal X-Plorer Serie 120A Robot Vacuum Cleaner User Guide
- June 6, 2024
- Tefal
Table of Contents
Tefal X-Plorer Serie 120A Robot Vacuum Cleaner
installation
- Plug the battery connector and insert the battery firmly into the slot.
- Clip the two side brushes to the special spindles.
- Choose the location of your docking station.
- Plug in your docking station.
- Turn the robot upside down and turn the power switch on. You will see LED lights blinking for 50 seconds.
- Position your robot on its docking station until the battery symbols are blinking.
- Wait 3 hours for the robot to be fully charged.
- Download the free app (cf. QR code).
- To enjoy your Tefal robot, simply just follow the instructions in the app!
- Moisten the mop with water before use.
- Attach the mop to the water tank.
- Open the water tank of the mop support and fill it with 110ml of water.
- Close the water tank.
- Clip the mop support in the two holes provided for this purpose.
- Turn back your robot.
Read User Manual Online (PDF format)
Loading......