InWin A45 A Series Power Supply with High Compatibility and Reliability User Manual

InWin A45 A Series Power Supply with High Compatibility and Reliability User Manual

Product Story

Quality Power, Great Performance, Low Noise

The InWin A Series is a power supply with high compatibility and reliability, it meets the 80 PLUS® certification for 230V. Equipped with powerful single +12V rail design and multi-protection safeguards. The A Series provides great performance at a good price.

Features

• 80 PLUS® 230V EU Standard Certified
  The A Series is an 80 PLUS® 230V EU Standard Certified power supply. It delivers up to 85% efficiency during normal use, generating less heat and effectively maintain the power supply’s stability.

• Smart Thermal Control to Balance Cooling and Noise
  The A Series utilizes a smart temperature controlled 120mm fan. It automatically detects heat to adjust the fan speed accordingly. It achieves silent operation and excellent thermal performance.

• Single +12V rail design for High-End Systems
  Powerful single +12V rail design, perfect for high-end components or overclocking.

• 3.3V DC to DC Design
  DC to DC converter design provides superior dynamic response and supports a foundation for greater system stability.

• Multi-Protection Safeguards (SCP, OVP, UVP, OPP)
  The A Series comes with plenty of safety protection safeguards against short circuits, over-and-under voltages and over-power. These precautions are to ensure quality and safe power usage.

Specifications

• InWin products comply with RoHS regulations.
• Specifications may vary based on different regions.

| 110W| 3.6W| 15W
A55| Max. Output Current| 42A

| 20A| 20A| 0.3A

| 3A| 550W
Max. Combined Power| 504W| 110W| 3.6W| 15W
A65| Max. Output Current| 50A| 20A| 20A| 0.3A| 3A| 650W
Max. Combined Power| 600W| 110W| 3.6W| 15W

Package Contents

1. A Series Power Supply Unit x1 (A45/ A55/ A65)
   

2. QR Code Card x 1

3. Power Cord x 1

4. Mounting Screws x 4
   

5. Cable Ties x 8

Cable Information

24 (20+4) Pin Motherboard x1

8 (4+4) Pin CPU x1

8 (6+2) Pin PCI-E x1

SATA x2

4 Pin Peripheral x1
Floppy x1

Installation

1. Make sure the power supply’s AC power cable is not connected before installation.

2. Place the power supply unit into the space provided in the case and secure the power supply unit with the screws.

3. Connect 24-pin power to the 24-pin socket on the motherboard.

4. Connect the 8-pin + 12V cable to the motherboard.
   A. If your motherboard has an 8-pin + 12V socket, connect the 8-pin cable directly to your motherboard.
   B. If your motherboard has a 4-pin socket, detach the 4-pin from the 8-pin cable, and plug the 4-pin cable directly to your motherboard.

5. Connect the peripheral cables, PCI-Express cables, and the SATA cables to the appropriate socket.

6. Make sure all the cables are tightly connected and save any unused modular cables for future usage.

7. Connect the AC power cord to the power supply and turn it on by switching the power button to the “I” position.

Troubleshooting

These troubleshooting points will help you diagnose and solve problems with your power supply if the unit fails to operate properly:

1. Please make sure the power supply and power cord are connected properly.
2. Please make sure the power cord is plugged into the power socket.
3. Please make sure the power supply I/O button is switched to the “I” position.
4. Please check if all the connectors (motherboard and peripheral) are connected properly.
5. Please allow a 5-second interval before turning the power on again when power supply is switched off manually.
6. If you are still experiencing difficulties, please contact your local distributor for RMA support.

Notices and Warranty

Notices

1. Please use the anti-static precautions while installing the components to prevent damage and injury.
2. Install in accordance with the user manual’s instructions and safety warnings.
3. High voltages are present in the power supply. Do not open the power supply case. Any modifications may damage the product and may place the user at risk.
4. Do not use the power supply if it has been wet or damaged to avoid electric shock or injury.
5. Do not install the power supply near any heat sources such as: radiators, heat registers, or other apparatus that produces heat.
6. Do not insert any objects into the open ventilation or fan grill area.
7. Use only InWin supplied cables. Other cables might not be compatible and could cause serious damage to your system and power supply.
8. Do not modify the cables and/or connectors included with the power supply.

Warranty

1. InWin provides a 3-year warranty toward the product. The warranty covers malfunctions or flaws before customer use. The warranty starts from your initial purchase (according to the date on your receipt). Please note that we do not honor the warranty for the product if it is not purchased personally or if it is purchased through an unauthorized distribution channel.
2. This limited warranty shall not apply if the defect was caused through any of the following:
3. Abuse and misuse,
4. Operation outside of product specification,
5. Unauthorized service or modification,
6. Any and all alteration of the product.
7. For more detailed warranty information, please visit the InWin retail website at www.in-win.com.
8. The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.

www.inwin.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>