MINISO K802 Multimedia Wireless Keyboard with Holder User Manual

K802 Multimedia Wireless Keyboard with Holder
User Manual

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY

Dimensions: 34.6cmx16.1cmx2.7cm
Main material: ABS
Working voltage: 3VDC
Working current: 30mA
Receiver parameters: Voltage 5VDC, current 20mA
FCC ID: 2ART4-SE65DP
IC: 27484-SE65DP
Working temperature and humidity: -25 -55C/<85%RH
Supported systems: Windows 98/2000/ME/INT; Windows XP
Windows VISTA /7/8/10

Product Features

1. Four modes (Three Bluetooth channels+ One 2.4G channel) multi-device connection. Switch as you want.
2. Integrated stand for cellphone/iPad for better use.
3. Multimedia functions keys, combination use of which bring you more convenience.

Usage

1. 2.4G connection mode: open the cover of the battery compartment at the bottom of the keyboard, insert 2 AAA batteries, take out the connector, put the cover back on. Plug the connector into the computer, move the switch in the bottom of the keyboard to the right, the indicator light will turn on, press FN+4 (at this time all of the lights will turn on), switch to 2.4G mode and you can start to use.
2. Bluetooth 1 connection mode: after inserting the batteries into the keyboard, move the switch in the bottom of the keyboard to the right, the indicator light will turn on. Press FN+1 at this time the first light will blink fast, use your computer or other devices with Bluetooth function to search for “MINISO-K802′, click on it to connect then you can start to use it.
3. Bluetooth 2 connection mode: after inserting the batteries into the keyboard, move the switch in the bottom of the keyboard to the right, the indicator light will turn on. Press FN+2, at this time the second light will blink fast, use your computer or other devices with Bluetooth function to search for “MINISO-K802”, click on it to connect, then you can start to use it.
4. Bluetooth 3 connection mode: after inserting the batteries into the keyboard, move the switch in the bottom of the keyboard to the right, the indicator light will turn on. Press FN+3, at this time the third light will blink fast, use your computer or other devices with Bluetooth function to search for “MINISO-K802”, click on it to connect, then you can start to use it.

Caution

1. Keep away from high temperature and moisture to avoid contact with conducting materials or liquids.
2. Do not install the batteries in the wrong direction to prevent short circuits.
3. Do not disassemble or repair the product by yourself.
4. If the product does not work normally, check if the batteries are installed properly and if the battery is low.

Storage
Turn off and store. Keep away from moisture and high temperature.

FCC Warning

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>