OSCULATI 65.950.00 GRIP-PRO Water-Based Anti-Slip Coating Kit Instructions
- October 27, 2023
- OSCULATI
Table of Contents
OSCULATI 65.950.00 GRIP-PRO Water-Based Anti-Slip Coating Kit
All files (texts and images) in this document are the property of Osculati S.r.l. therefore their partial or total reproduction to third parties or any different use without written authorization is forbidden. Thank you for your choice.
DESCRIPTION
The white water-based anti-slip protective coating is based on special charges and additives which give the product UV-resistant and water stagnation- resistant properties.
USES
The product is suitable for waterproofing fiberglass decks, poolside and metal sheds also oxidizable, where a non-slip effect is required.
APPLICATION
- The product is ready to use and can be applied by a short-bristle roller or brush.
- Apply it at temperatures between +5°C and +35°C.
- Apply the product in 2 coats at least (wait 24 hours from the first application to the second) in order to get a even thickness, ideal for waterproofing.
SURFACE PREPARATION
Accurately clean the support to eliminate dust, crumbly parts, and foreign or bonding-proof matters.
USEFUL ADVICE
- Do not add any additives.
- Do not use if the container is damaged.
- Do not add water or solvents.
- Do not apply if rain is imminent.
- Protect it from water, rain, and snow during the first 24 hours of its application
STORAGE
The product in its undamaged packaging can be stored for 18 months. It is not
frost-proof.
Please store it at temperatures between +5°C and +35°C.
YIELD
- 0,4-0,5 kg/m2 in two coats.
PACKAGE
- 1 kg.
Osculati S.r.l. via Pacinotti, 12 20054 Segrate Ml tel 02 2699 111; fax 02
2699 1120
www.osculati.com;
info@osculati.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>