SECURE SCD100-000 Programmable Thermostat Display User Guide

June 6, 2024
SECURE

SCD100-000 Programmable Thermostat Display
User Guide

SECURE SCD100-000 Programmable Thermostat Display - 1

Follow these instructions and safety measures to avoid the risk of injury or damage to the equipment.

  • Local best practices and regulatory stipulations must be observed.
  • Installation should be done by trained personnel only.
  • Do not use solvents or abrasive materials to clean the device, use only an anti-static cloth.

As part of Secure Meter’s continuous endeavor to improve, product design and specifications mentioned are liable to change. System functionality information, illustrations, and product aesthetics published in the document may vary from those of your product.

In the box

SECURE SCD100-000 Programmable Thermostat Display - In the
box

Programmable Thermostat Display PTD + Backplate

Technical specifications

Operating temperature 0°C to 40°C
Storage temp. range -20°C to +70°C
Relative humidity 0% to 95% non condensing
Pollution degree 2
Ingress protection IP30
Battery specifications Non replaceable 2x A Lithium-ion, 3.6 V, 3600 mAh

(each)
Battery life| ≈12 years
Wireless communication| 2.4 GHz RF
Standards| 1. EN 300-328
2. Safety standards: IEC 62368-1
3. EN 301 489-1, 17 (RED)
4. RoHS Directive 2011/65/EU
5. WEEK

Ideal mounting location

SECURE SCD100-000 Programmable Thermostat Display - Ideal mounting
location

Locations to avoid

SECURE SCD100-000 Programmable Thermostat Display - Locations to
avoid

Installation

SECURE SCD100-000 Programmable Thermostat Display - Installation
1Commissioning the new PTD

SECURE SCD100-000 Programmable Thermostat Display - Installation
2

Note: The product is shipped in deep sleep mode to save battery. To wake up the device, you must press the button at the rear before setup. The PTD has great temperature sensitivity and you may observe a sudden rise in ambient temperature during the commissioning process triggered by your touch. This is only temporary.

SECURE SCD100-000 Programmable Thermostat Display - Installation
3

PTD will search for the receiver and display the receiver serial number. To verify the number, check your product box packaging or scan the QR code on the receiver using your smartphone. Press + or – to select (Yes or No). Press Home-Away to confirm selection

SECURE SCD100-000 Programmable Thermostat Display - Installation
4

Mount

SECURE SCD100-000 Programmable Thermostat Display - Installation
5

Refer to the user manual for more details

www.securemeters.com
Secure Meters (UK) Ltd
South Bristol Business Park,
Roman Farm Road, Bristol, BS4 1UP
United Kingdom
Bristol Phone: +44 117 9788 700
UK Free Phone: 08081687224
UK Direct : +44 196 2826 225
support@securemeters.com
Copyright © 2020-21, SIHPL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SECURE User Manuals

Related Manuals