Flycatcher 2AMQX10426653543 Electric Toy User Manual
- June 6, 2024
- Flycatcher
Table of Contents
CAUTIONELECTRIC TOY:
Not recommended for children under 3 years of age.
As with all electric products, precautions should be observed during handling
and use to prevent electric shock.
AC adapter: INPUT:100-240VAC, 0.3A MAX 50/60Hz;
OUTPUT: 5.9V 1.0A
SIMPLE SET UP
- Separate the projector head from the base unit.
- Insert the head unit into the top of the base unit until you hear a click.
- Plug the USB Power Cable (included) into the back of the unit and into a USB power outlet (5V DC, minimum 1.2A). If you wish to use batteries instead, insert four D batteries(not included) according to the directions provided. When using batteries, it is recommended to enable “efficiency mode” by pressing the blue circle button for 2 seconds (see image).
- Pull out the blue legs to stabilize the projector and create a paper holder.
- Flip the Power Switch on the back to turn on the projector.
- Insert the pre-loaded Activity Cartridge into the top of the projector.
- After 10 minutes with no activity, the projector light will automatically turn off. Reactivate the light by using the buttons 2s in the app or on the projector.
For more fun, additional Activity Cartridges and accessories are available
at: https://www.flycatcher.toys/smart-
sketcher-2.0/
WARNING
CHOKING HAZARD- Small parts. Not for children under 3 years.
The toy should be periodically examined for potentially hazardous parts to be
repaired or replaced.
Please retain this user manual for future reference
QUICK START
-
Download the “smART sketcher Projector” app on your mobile device or tablet.
-
Open the app and enable Bluetooth on your device.
-
If you haven’t registered yet: Click the “I have a smART sketcher” button and follow the instructions to complete the one-time registration process.If you have already registered: Click the “Login with Flycatcher ID” link.
-
Once the device is connected to the projector, choose your mode of play: Learn to Draw (pre-loaded Activity Cartridge), or Trace Pictures (taken from your own device).
-
Trace Pictures :
– Click the camera button (you will need to enable permission for access to the camera and photos)
– Select an image from your photos or take your own using the in-app camera.
– Select a filter.
– Drag the slider button to adjust darkness.
– Press the “check” button to transfer the image to the smART sketcher® Projector.
– Begin tracing on paper.
6. Learn to Draw:
– Insert the Activity Cartridge that came with your device or any smART sketcher® Activity Cartridge (purchased separately) into the top of the projector.
– The app will display the loaded content.
– Scroll to find the image you want to draw and select it.
– The image will be projected onto your paper. – Begin drawing!
Requires Android 5.01+
Requires Apple iOS 9.0+
SAFETY INFORMATION
BATTERY SAFETY INFORMATION
- In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product.
- To avoid battery leakage:
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Do not mix old and new batteries.
- Only batteries of the same or equivalent types as recommended to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the product.
- The supply terminals are not to be short-circuited.
- Dispose of battery(ies) safely.
- Do not dispose of this product in a fire.
BATTERY INSTALLATION
To insert or change the batteries, twist the screw counter-clockwise to loosen. Remove old batteries and insert 4 D batteries with the correct polarity. Replace the screw and twist clockwise to close.
smART sketcher® is a trademark of Flycatcher Inc.
Copyright © 2021 Flycatcher Inc. All rights reserved.
Visit us at: www. flycatcher.toys/smart-
sketcher/2
For more detailed instructions, questions or problems, please visit
www.flycatcher.toys/smart-sketcher/2
Manufactured by:
Flycatcher Inc. 59 East 54th Street New York, NY 10022
support@flycatcherapps.com
EXTERNAL POWER SUPPLY
If your smART sketcher came with a USB POWER CABLE:
- Connect to an AC ADAPTER having an output DC Voltage Rating of 5V DC and a minimum current rating of 1.2A
- WARNING! DO NOT PLUG A USB CABLE INTO A LAPTOP OR COMPUTER!
If your smART sketcher came with an AC ADAPTER:
Transformers/chargers used with the toy is to be regularly examined for damage
to the cord, plug, enclosure, and other parts, and, in the event of such
damage, the toy must not be used with this transformer/charger until the
damage has been repaired.
The toy is not intended for children under 3 years old;
-
The toy shall only be used with a transformer for toys
-
The model number XY06J-0601000Q-EW (EU only/ XY06J-0601000Q-BW (the UK only)/ XY06S-0601000Q-UW/XY06S-0591000Q-UW/ XY-0601000-A (Aus-NZ only) or specification of Input Voltage:
AC 100-240V 50-60 Hz, Output Voltage: DC 5.9V, 1A, transformer for use with the toy -
The transformer is not a toy;
-
Toys liable to be cleaned with liquid are to be disconnected from the transformer before cleaning.
RADIO STATEMENT
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.