InWin MO-W35B Wireless Mouse User Manual
- June 6, 2024
- InWin
Table of Contents
Wireless Mouse Manual
Firstly. Wireless Mouse Packing Content
wireless mouse 1 pcs
Mini receiver 1pcs
Manual * 1 sheet
Secondly. First Using
- Open power on key on the bottom( The mouse without Power Key will bright up for 2 seconds directly)
- I nsert the mini receiver into computer USB port
- Wireless mouse installation has been finished and needs to wait for 5 seconds for the first using
Thirdly. Mouse Functions Introduction
-
Cursor movement speed switch
There are three speeds 800 1200 1600 for the switch. The incipient default setting is 1200
DPI. And you could switch circularly with the front button on the top of the mouse. -
Power on/off function
It could be powered off on the bottom of the mouse when it hasn’t been used for a long time so as to save power maximal -
Arousal function
If the mouse hasn’t been used for a long time, it will enter dormancy in the
first 2 minutes.
When using, you just remove the mouse and it will wake up; If it hasn’t been
used for 5 minutes it will enter deep dormancy and it should be clicked the
left or right-click to wake up.
Fourthly. Attention
- It will be influenced to use on the reflect light or serious rugged surface.
- Don’t keep the mini receiver and Bluetooth receiver closed.
- Don’t not disassemble the mouse or mini receiver
- Please use dry and soft cotton goods to clean the mouse
About Wireless Field Illustration
This product’s RF frequency is 2.4Ghz to meet Euro request for radiation which
won’t harm to humans. Wireless launching will generate electromagnetic
signals. If there are places to use cardiac pacemakers or related physical
instruments, please use them with caution.
Fifthly. Technical Specifications
Wireless carrier band 2411MHz~2471MHz
Wireless working channel 31Automatic frequency hopping
Mouse normal voltage1 PCS 400mA internal battery
Mouse normal current 13MA
Mouse tracking system Red light
Resolution 800/1200/1600dpi adjustable
USB portLowest request 1.1 version
Wireless distance：8-12M（normal situation）
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.